- 67-73 XL, 77-80 XL Sportster with Prestolite starter.
-
This is an original starter housing, in good shape. Has a couple of rub marks on top of housing, as shown. All threaded holes look good. Application: -
Reproduction part Hitachi P/N: DS 195154 Replaces OEM P/N: 31572-79 -
HARLEY Genuine Part ~ used P/N's: 31604-61 Coil and 31802-61 Cover Includes mounting bracket, hold down clamp, cover stud, outer chrome cover. They have been tested. Both are in good working condition. No cracks. Has one small piece chipped around wire stud, as shown. Applications:- 1961-64 Duo-Glide, FL, FLH with dual-point circuit breaker
-
2-cycle rings Many applications Wiseco P/N: 3189TD 81.00 mm -
This kit contains all necessary OEM replacement parts to rebuild one front brake caliper assembly. Kit made in Japan. Our P/N: 32-1289 Replaces Kawasaki P/N:- (1) 43054-003 Dust Seal
- (1) 43049-002 Piston Seal Ring
- (4) 43052-005 Dust Boot
- (4) 43053-006 O-Ring
- (1) 43057-003 Bleeder Cap
- 1976-77 KZ900A
- 1977-80 KZ1000A
- 1979-80 KZ1000B LTD
- 80 KZ1000D Z1R
- 1979-81 KZ1000C Police
- 1980 KZ1000-G1 Classic
- 1979-80 KZ1000E Shaft
-
Out of stock
Quality powder coated part OEM Kawasaki P/N: 32029-1024 Applications:- 78 + 80 Z1R KZ1000D
- 79 + 80 KZ1000 MKII
- 80 KZ1000 LT
- Some KZ1000 Police
-
Out of stock
This part has been given a powder coat finish by ACE Powder Coating. Nice, original used powder coated right front engine mount! Applications:- 76-77 KZ900A
- 1976 KZ900 LTD
- KZ900 Police
- 73-75 Z1 900
- 81 and down KZ1000 Police
- 77-80 KZ1000A
- 78 & 80 Z1R
- KZ1000G (Z1 Classic)
- 77-80 KZ1000 LTD
-
Nice, original used powder coated lower right motor mount! This part has been given a powder coat finish. Kawasaki P/N: 32030-026 Applications:- 76-77 KZ900 A4-A5
- 1976 KZ900 B1 LTD
- KZ900 Police
- 73-75 Z1 900
- Z1 Police
- 79-80 KZ1000 E1-E2 (Shaft)
- 77-80 KZ1000 A1-A4
- 78-80 KZ1000 D1 & D3 (Z1R)
- 1980 KZ1000 G1 (Classic)
- 77-80 KZ1000 B1-B4 LTD
-
Out of stock
This is a reconditioned original part, it has been freshly powder coated. Pad Length is 33mm. Kawasaki P/N: 32030-055 Superseded P/N: 32030-066 Applications:- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 Police C2
- 1977-1978 KZ1000A
- 1977-1980 KZ1000 LTD
- 1980 KZ1000 G Z1 Classic
- 1980 KZ1000 Police, C1 C1A
-
Out of stock
Kawasaki P/N: 32030-063 Nice replated front engine mount plate Applications:- 77-79 KZ650 B
- Will fit others, including some 750 four cylinders
-
Nicely powder-coated right rear motor mount plate Kawasaki P/N: 32030-065 Applications:- KZ650 B
- KZ650 C
- KZ650 D
- KZ650 E1
- KZ650 F1
- Will fit others, including some 750 four cylinders
-
Right rear engine plate. Nicely powder-coated part. Genuine Kawasaki P/N: 32030-065 Applications:- KZ650B
- KZ650 C
- KZ650 D
- KZ650 E1
- KZ650 F1
-
Genuine Kawasaki Part ~ Used (reconditioned.) Pad Length is 28mm. This is a reconditioned original part, it has been freshly powder coated. Kawasaki P/N: 32030-066 Previous P/N: 32030-055 Applications:- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- 77-80 KZ1000G Z1 Classic
- 1980 Kawasaki 1000 POLICE C1, C1A
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 POLICE C2
-
This is a reconditioned original part, it has been freshly powder coated. Kawasaki P/N: 32030-067 Applications:- 77-78 KZ1000A
- 77-79 KZ1000 LTD
- KZ1000 C1, C1A Police
-
Out of stock
New Old Stock. Zinc. Kawasaki P/N: 32032-1084 Applications:- KZ400 B1, B2, C1, H1
- KZ440 A1, A2, A3, B1, B2, D1, D2, D4, D5, G1
-
New Old Stock Genuine Kawasaki P/N: 32032-1752 Applications:- 1976-79 KZ750B Twin
- 1980 KZ750G LTD Twin
- 1982 KZ750M CSR Twin