- 1982-1983 KZ1000R
- 1981-1983 KZ1000J
- 1981-1982 KZ1000K LTD
- 1981-1982 KZ1000M CSR
- 1982-1986 KZ1000 Police
- 1987-1990 KZ1000 Police
- 1991-1995 KZ1000 Police
- 1996-2000 KZ1000 Police
- 2001 KZ1000 Police
- 1981-1982 GPZ1100
- 1981-1983 KZ1100A
- 1983 KZ1100L1 LTD
- may fit others
-
Used Genuine Kawasaki P/N's: 21007-1036 Rotor 13196-1006 Clutch Will fit: -
Reproduction 1st Over Piston Kit 66.5 mm Kit consists of:- 4) 13029-058 Pistons
- 4) 13025-046 Rings
- 4) 13002-022 Piston pins
- 8) 92036-021 Circlips
- 73-75 Z1 900
- 76-77 KZ900
-
Nice used crankshaft. Kawasaki P/N: 13031-056 Applications:- 77 KZ1000A
- KZ1000 LTD
-
Out of stock
Complete rebuild kit. OEM Kawasaki P/N: 43041-001 This caliper has new bleeder, New brake pads, and has been powder coated. Applications:- 72 H1B
- 73-75 H1 500
- 76 KH500
- 72 H1B
- 72-75 H1B
-
We are parting out a 71 Sportster. According to our parts book, these will fit 70-71, may fit others. No broken fins, comes with used piston & rings. Harley P/N's:- 16464-70
- 16465-70
-
Out of stock
OEM Kawasaki P/N: 33001-046 Date code stamped 311. Has some minor pitting, as shown. Has been powder coated. Sold as shown. Applications:- 73-75 Z1 900
- 76-77 KZ900A
-
New Old Stock Kawasaki P/N: 11005-051 Center cylinder, Type 2 The perfect part for the perfect bike Application:- Late 69-72 H1 500
-
Front end fork assembly with wheel. We recently purchased a small warehouse of parts. This is in decent shape, front fender has some warping from storage. Front wheel is not bent. Tire looks okay. Not the original tire. Not a lot of miles on the front end. Front brakes are not working. Throttle housing still good. Has throttle lock. Sold as complete setup or will part out. Low cost shipping available upon request. Location: Gravestone Building -
Out of stock
Genuine Kawasaki Parts ~ Used Give your project a nice added touch! Triple clamp has been freshly powder coated & includes new bolts that we have manufactured here in the U.S. Semigloss Black Powder Coated. Sold as shown. Includes Kawasaki P/N: 44039-045 Upper Triple Clamp Kawasaki 46012-008 Top Clamps (qty 2) 44041-048 Triple Clamp Pinch Bolts (qty 2) 44041-038 Steering Stem Bolt (qty 1) 92020-007 Steering Stem Nut (qty 1) 410B0800 Washer (qty 1) 461F0800 Spring Washer (qty 7) 92007-002 Bolts (qty 4) Applications:- 73-75 Z1 900
-
Front Cylinder Head Made in 1955 only Harley P/N: 16702-55 Intake port has 12 d-ring holes, which should be 6. Overall in very good shape. Applications:- 1955 FLH
-
Out of stock
We removed this wheel from a Z1 900. Very nice drum. We can remove the drum for lower-cost shipping. Can also replace to 18" for additional cost. See video below. Applications:- 73-75 Z1 900
- 76-77 KZ 900A
- Late 73-75 H2 750
-
Kawasaki Genuine Part ~ REBUILT Kawasaki P/N: 44039-048 Nice, ready-to-go fork bridge set, complete. Rebuilt with quality bolts and hardware made by Johnny's. Includes:- 44039-048 Upper stem
- 44037-053 Lower stem
- 92007-031 Bolt
- 92022-230 Washer
- 46012-010 Lower handlebar holder
- 46012-008 Upper handlebar holder
- 73-75 H1 500
-
We believe these heads are for the 1971 Sportster. May fit others. They appear to be in very nice shape. Came from a 1971 with a blown transmission. One fin may have some damage. Chrome is not nice on the rocker boxes, as shown. Watch movie for a closer look: Harley P/N:- 16673-71 Front
- 16674-71 Rear
-
This piece came from a vintage drag inventory we recently acquired. Not sure if it is from a 1979 or 80 model as the part numbers differ. Should fit either, but the tubes must be used with the lower legs. Possible low-cost shipping upon request, or local pick up if preferred. WILL SEPARATE. Sold as shown - no returns -
Out of stock
This wheel has new bearings, seal & spokes. Genuine style spokes Powder coated, new D.I.D. rim Product Number: 41074-022 Application:- Z1 900
- ALL H2 750
- 72-75 H1 500
-
Right Carburetor Outer VM28SS Mikuni New Kawasaki Genuine Parts ~ New Old Stock Kawasaki P/N: 16001-1154 Application- 1979-80 KZ1000A
-
Motor # 4A66843H3 This is a matching numbers motor. Numbers are genuine. Motor turns over. No visible welding or damage. No title. This motor weighs 69 lbs WITHOUT the crate. This motor may be shipped, for an additional fee we can build a shipping crate. Please call us for shipping quotes. Possible low-cost shipping upon request, depending upon where you live. -
This is THE complete kit for your H1 500! Quality reproduction product, made in Japan. Applications:- 69-71 H1 500
- 1972 H1C
Quantity Part Number Description 1) 11015-014 Air inlet pipe assy 2) 92037-043 Air inlet clamp 3) 92037-034 Air cleaner clamp 1) 92037-035 Air inlet pipe clamp -
1988 Kawasaki Concours is missing the gas tank, seat, bags, and bag mounts. Sold as shown. Willing to separate.- Starter works
- Carbs are available
- Exhaust and wheels look good
- Not sure about the motor but it does turn over
- 67,000 miles
-
Comes with Clear Title. Front wheel has been sold. LTD wheel shown is just for mobility. Has some damage in back where tail light goes, should be an easy fix. -
We have taken many parts from this motorcycle over the years, and it's time to find it a new home! This would be a nice project, or a good parts donor. The frame appears to be straight. Sold as shown in photos. Clear Ohio title. Stock # 2145 See movie link below. If you do not want the whole thing, let us know. We will separate. Give us a call. -
Parting out a Suzuki GS1100G which had been wrecked. We have not tested the transmission. Hear it turn over in the video. Dyno cover has been smashed. Head is nice. Some crash marks where the exhaust hit the head. Nothing really bad. WE HAVE NO TITLE. SELLING FOR PARTS ONLY! We have some extras; the seat, rear grab bar, side covers, front brake rotors, rear wheel. As always, possible low-cost shipping upon request. -
Out of stock
This is a very nice restored rear wheel. OEM Kawasaki P/N: 42048-042 Date code: 7D Applications:- 77-78 KZ1000A
-
Out of stock
Legs are polished to a high gloss finish. Consists of:- 1) 44005-045 Left Hand Outer Tube
- 1) 44006-043 Right Hand Outer Tube
- 2) 44009-014 Fork Seals
- 2) 44043-044 Washer NOS
- 2) 44044-012 Circlip NOS
- 2) 44010-018 Dust Shield
- 2) 28012-009 Reflector (used)
- 2) 92094-011 Reflector Rubber (used)
- 2) 220B0408A Screw NOS
- 2) 44045-002 Fork Drain Gasket NOS
- 73-75 Z1 900
-
Out of stock
Legs are polished to a natural brushed finish with clear coat. Consists of:- 1) 44005-045 Left Hand Outer Tube
- 1) 44006-043 Right Hand Outer Tube
- 2) 44009-014 Fork Seals
- 2) 44043-044 Washer NOS
- 2) 44044-012 Circlip NOS
- 2) 44010-018 Dust Shield
- 2) 28012-009 Reflector (used)
- 2) 92094-011 Reflector Rubber (used)
- 2) 220B0408A Screw NOS
- 2) 44045-002 Fork Drain Gasket NOS
- 73-75 Z1 900
-
Out of stock
OEM Kawasaki P/N: 11011-065 Includes P/N:- 11013-063 Element, air cleaner
- 11012075 Cap, air cleaner
- 11011065 Body, air cleaner
- 11016009 Silencer
- 92059-124 Tube drain
- 11015-050 Inlet pipe LH outside
- 11015-051 LH inside and RH inside (2) pipe
- 11015-053 RH outside pipe
- More
- 77-78 KZ1000A
- 77-78 KZ1000 LTD
-
Legs are polished to a natural brushed finish. Consists of:- 2) 44013-032 New fork tubes
- 1) 44006-039 Right Hand Outer Tube
- 1) 44005-041 Left Hand Outer Tube
- 2) 44062-003 Polished Top bolt
- 2) 44009-014 New fork seal
- 1) 220B0408A Fork drain kit
- 2) 44010-018 Fork dust seals
- 72-75 H2 750
- 73-75 H1
- 72 H1B
-
Out of stock
Legs are polished to a nice gloss finish. Consists of:- 2) 44013-032 New fork tubes
- 1) 44006-039 Right Hand Outer Tube
- 1) 44005-041 Left Hand Outer Tube
- 2) 44062-003 Polished Top bolt
- 2) 44009-014 New fork seal
- 1) 220B0408A Fork drain kit
- 2) 44010-018 Fork dust seals
- 72-75 H2 750
- 73-75 H1
- 72 H1B
-
Out of stock
Wheel consists of:- Brand new DID Rim
- Buchanan Stainless Spokes and Nipples
- Polished Hub
- New Bearing and Seal
- 77-78 KZ1000A
- 76-77 KZ900A
- 76 KH500
- 77-79 KZ750B
- 70's KZ650
- May fit others
-
Wheel consists of:- Brand new DID Rim
- Buchanan Stainless Spokes and Nipples
- Hub
- New Bearing and Seal
- 77-78 KZ1000A
- 76-77 KZ900A
- 76 KH500
- 77-79 KZ750B
- 70's KZ650
- May fit others
-
Out of stock
Stainless Spokes. New D.I.D. rim. Application:- Late 73-75 H2 750
- 73-75 Z1 900
- 76-77 KZ 900
-
We are parting out this bike. Good brakes Please call or email with your needs. -
Chassis with title. Will sell whole or part it out. Stock# 2961 -
- Powder Coated Hub
- Buchanan Stainless Steel Spokes and Nipples
- New Bearings
- New DID Rim
- New Rim Band
- 1973-1975 Z1 900
- 1972-1975 H1 500
- 1972-1975 H2 750
-
- OEM Spokes and Nipples
- New Bearings
- New DID Rim
- New Rim Band
- 1969-1975 H1 500
-
Motor # 3A13337H1 This is a matching numbers motor. Numbers are genuine. Motor turns over. Very nice rebuildable core. No visible welding. Needs repaired where the sprocket cover goes, as shown. No title. This motor weighs 118 lbs WITHOUT the crate. This motor may be shipped, for an additional fee we can build a shipping crate. Please call us for shipping quotes. Possible low-cost shipping upon request, depending upon where you live. -
Out of stock
Rebuilt using quality parts Kawasaki P/N: 42048-023 DID rim 2.15 x 18 New spokes New bearings Applications:- 73-75 Z1 900
- 76-77 KZ900A
- Late 73-75 H2 750
-
Motor # 65XLH7109 This is a matching numbers motor. Numbers are genuine. Motor turns. No visible welding Very nice. No title. This motor weighs 53 lbs WITHOUT the crate. This motor may be shipped, for an additional fee we can build a shipping crate. Please call us for shipping quotes. Possible low-cost shipping upon request, depending upon where you live. -
Out of stock
Rebuilt using quality parts Kawasaki P/N: 42048-023 Rebuilt polished hub Buchanon stainless steel nipples and spokes New bearings Metal side valve tube-type rim Applications:- 73-75 Z1 900
- 76-77 KZ900A
- Late 73-75 H2 750
-
Out of stock
Rebuilt using quality parts Kawasaki P/N: 42048-023 Rebuilt polished hub Buchanon stainless steel nipples and spokes New bearings Metal side valve tube-type rim Applications:- 73-75 Z1 900
- 76-77 KZ900A
- Late 73-75 H2 750
-
VIN# JKAKZBD12CA003038 ENG#: KZT10AE014583 We are selling this bike with title, as-is, or parting out. Motor is stuck. No tank, no side covers, hole in bottom of headers. Seat pan rusty. No broken fins. Could be a good donor. Many good parts here. Coils, electrics, shock boots. Selling as-is or parting out. Good title, frame is straight. -
- NOS OEM Spokes and Nipples
- New Sealed Bearings
- NOS Date Coded 1975 Takasago Rim 305
- Hub vapor blasted and polished
- 1975 H1 500
- Will work on 69-75 or KH500, but is correct for 1975 H1
-
P/N: K1015 Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for each application. Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Kit Includes:- 4 Pistons
- 4 Ring sets
- 4 Piston pins
- 8 Circlips
- Base gasket
- Head gasket
- Z1 900
- KZ1000
-
Out of stock
Nice Rebuilt Fork Assembly Consists of:- 44005-045 LH Outer Tube
- 44006-043 RH Outer Tube
- 2) 44013-037 Fork Tube
- 2) 44062-003 Fork Top Bolts
- 2) 44010-018 Dust Shield
- And More
- 73-75 Z1 900
-
Motor# KZT000JE032164 Parting out an 82 KZ1000J, offering this motor separately. No title. 27,000 miles. Charging system works, Good rotor, selling without the carbs. Motor, ignition, starter included. The bike has been sitting for years, but inside the motor was well preserved, as shown. No broken fins. No damage. Clutch not frozen up. Ignition was replaced, new clutch gasket, transmission is good. No smoke, no oil leaks. Sold as-is. Will ship dry. Watch video below to see it run. Applications:- KZ1000J
- KZ1000 CSR
- KZ1000 LTD
- KZ1000 Police
-
Out of stock
Genuine Kawasaki Z1 900 903 cylinder has been freshly bored and vapor blasted. Each piston is marked their respective cylinders, as no 2 pistons are alike. Very nice assembly. Kit contains:- 11005-136-2H OEM cylinder (1)
- 13029-058 Piston 0.50 (4)
- 13025-046 Ring (4)
- 13002-022 Pin (4)
- 92036-021 Clip (8)
- 74-75 Z1 900
- 76-77 KZ900A
- 76 Z1 900 LTD
-
Out of stock
Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 127-61001 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
FRAME# JKAKZBB14CAO12810 ENG# KZ8T10BE012738 Purchased this basket case GPZ along with a Kawasaki Z1. This came from an estate, and it came in boxes. The frame does not appear to be bent. The originals sticker is on the frame and we have a title with this bike. Crank feels okay, probably should be inspected. 18" rear wheel is complete with rotor and sprocket carrier. Rim is nice and straight, not bent. Rear inner fender is intact, with electrical connections. Side stand, 19" wheel is complete and rim is not bent. Cylinder head no broken fins but incomplete, only one cam cap and no cams. Exhaust studs look nice, fuel injection looks good, combustion chambers look good. Fuel injection unit, air box, (only one air box side over), we think the front sprocket cover is correct, brake parts, extra caliper, tail light, handlebars, (one may be bent), mirror, fuel sending unit, gauge, sprocket, ignition switch with key, clutch push rod (bent). See video for details. Sold as shown. Low cost shipping available. FRAME HAS BEEN SOLD, ALONG WITH SWING ARM