- 67-73 XL, 77-80 XL Sportster with Prestolite starter.
-
This is an original starter housing, in good shape. Has a couple of rub marks on top of housing, as shown. All threaded holes look good. Application: -
Reproduction part Hitachi P/N: DS 195154 Replaces OEM P/N: 31572-79 -
HARLEY Genuine Part ~ used P/N's: 31604-61 Coil and 31802-61 Cover Includes mounting bracket, hold down clamp, cover stud, outer chrome cover. They have been tested. Both are in good working condition. No cracks. Has one small piece chipped around wire stud, as shown. Applications:- 1961-64 Duo-Glide, FL, FLH with dual-point circuit breaker
-
2-cycle rings Many applications Wiseco P/N: 3189TD 81.00 mm -
This kit contains all necessary OEM replacement parts to rebuild one front brake caliper assembly. Kit made in Japan. Our P/N: 32-1289 Replaces Kawasaki P/N:- (1) 43054-003 Dust Seal
- (1) 43049-002 Piston Seal Ring
- (4) 43052-005 Dust Boot
- (4) 43053-006 O-Ring
- (1) 43057-003 Bleeder Cap
- 1976-77 KZ900A
- 1977-80 KZ1000A
- 1979-80 KZ1000B LTD
- 80 KZ1000D Z1R
- 1979-81 KZ1000C Police
- 1980 KZ1000-G1 Classic
- 1979-80 KZ1000E Shaft
-
Out of stock
Quality powder coated part OEM Kawasaki P/N: 32029-1024 Applications:- 78 + 80 Z1R KZ1000D
- 79 + 80 KZ1000 MKII
- 80 KZ1000 LT
- Some KZ1000 Police
-
Out of stock
This part has been given a powder coat finish by ACE Powder Coating. Nice, original used powder coated right front engine mount! Applications:- 76-77 KZ900A
- 1976 KZ900 LTD
- KZ900 Police
- 73-75 Z1 900
- 81 and down KZ1000 Police
- 77-80 KZ1000A
- 78 & 80 Z1R
- KZ1000G (Z1 Classic)
- 77-80 KZ1000 LTD
-
Nice, original used powder coated lower right motor mount! This part has been given a powder coat finish. Kawasaki P/N: 32030-026 Applications:- 76-77 KZ900 A4-A5
- 1976 KZ900 B1 LTD
- KZ900 Police
- 73-75 Z1 900
- Z1 Police
- 79-80 KZ1000 E1-E2 (Shaft)
- 77-80 KZ1000 A1-A4
- 78-80 KZ1000 D1 & D3 (Z1R)
- 1980 KZ1000 G1 (Classic)
- 77-80 KZ1000 B1-B4 LTD
-
Out of stock
This is a reconditioned original part, it has been freshly powder coated. Pad Length is 33mm. Kawasaki P/N: 32030-055 Superseded P/N: 32030-066 Applications:- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 Police C2
- 1977-1978 KZ1000A
- 1977-1980 KZ1000 LTD
- 1980 KZ1000 G Z1 Classic
- 1980 KZ1000 Police, C1 C1A
-
Out of stock
Kawasaki P/N: 32030-063 Nice replated front engine mount plate Applications:- 77-79 KZ650 B
- Will fit others, including some 750 four cylinders
-
Nicely powder-coated right rear motor mount plate Kawasaki P/N: 32030-065 Applications:- KZ650 B
- KZ650 C
- KZ650 D
- KZ650 E1
- KZ650 F1
- Will fit others, including some 750 four cylinders
-
Right rear engine plate. Nicely powder-coated part. Genuine Kawasaki P/N: 32030-065 Applications:- KZ650B
- KZ650 C
- KZ650 D
- KZ650 E1
- KZ650 F1
-
Genuine Kawasaki Part ~ Used (reconditioned.) Pad Length is 28mm. This is a reconditioned original part, it has been freshly powder coated. Kawasaki P/N: 32030-066 Previous P/N: 32030-055 Applications:- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- 77-80 KZ1000G Z1 Classic
- 1980 Kawasaki 1000 POLICE C1, C1A
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 POLICE C2
-
This is a reconditioned original part, it has been freshly powder coated. Kawasaki P/N: 32030-067 Applications:- 77-78 KZ1000A
- 77-79 KZ1000 LTD
- KZ1000 C1, C1A Police
-
Out of stock
New Old Stock. Zinc. Kawasaki P/N: 32032-1084 Applications:- KZ400 B1, B2, C1, H1
- KZ440 A1, A2, A3, B1, B2, D1, D2, D4, D5, G1
-
New Old Stock Genuine Kawasaki P/N: 32032-1752 Applications:- 1976-79 KZ750B Twin
- 1980 KZ750G LTD Twin
- 1982 KZ750M CSR Twin
-
Out of stock
Great reconditioned part. Kawasaki P/N's: Bracket 32049-101 Grommet 92071-056 Applications:- 1977-1978 KZ1000A
- 1977-1980 KZ1000B LTD
- 1978-1980 KZ1000C Police
- 1980 KZ1000G Classic
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 32054-1021 Superseded P/N: 34036-001 Applications:- 77-80 KZ1000A
- Some KZ400
- 1980 Z1R
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 32056-012 Application:- 1972 H1-B 500
-
New Old Stock Genuine Kawasaki P/N: 32069-1099 Applications: Fits left and right:- KZ750 F1
- 82-83 KZ750N Spectre
-
Out of stock
This part has been given a powder coat finish by ACE Powder Coating. Nice, original used powder coated battery case! *actual case received may vary slightly from photos, as we have multiple quantities Kawasaki P/N: 32097-022 Applications:- 73-75 Z1 900
- Z1 Police
-
New Old Stock Genuine Kawaski P/N's: 32097-028 Battery Box 92075-078 Rubber Applications:- 1973-1975 MC1
- 1976-1978 KM100
-
Nicely powder-coated battery box. Includes 92071-056 rubber grommet. Applications:- 76-77 KZ900A
- 76 KZ900 LTD
-
Out of stock
Kawasaki Genuine Part ~ Nicely reconditioned and freshly powder coated by ACE Powder Coating Kawasaki P/N: 32097-044 Applications: 77-78 KZ1000 77-80 KZ1000 LTD 77-81 KZ1000 Police -
Quality made in the United States Replaces P/N: 32098-015-10 Applications:- 72, 73 H2 750
- 72 S2 350 if painted SILVER
-
New Old Stock Genuine Kawasaki P/N: 32098-025 Applications:- 77-78 KZ400A
- 76-77 KZ400D
- 76-77 KZ400S
-
Genuine Kawasaki, Used Kawasaki P/N: 32098-028 Applications:- 1977-1980 KZ650
- 1982 KZ750M CSR Twin
- 1983 KZ750 K1 LTD Belt
-
Genuine Kawasaki - New Old Stock Kawasaki P/N: 32099-005 Applications:- 1970 G4TR
- 1974 G4TRD
- 1975 G7TRE
- 1976 KV100
- 1971 F8 250
- 1970 F5 350
- 1972 F9 350
- 1974-1975 F9 350
-
Includes handle. Genuine Kawasaki, Used Kawasaki P/N: 32099-010 Applications:- 1974 Z1 900 as per the decal
- Will fit all Z1 but the decal varies
-
Out of stock
Quality replacement part. Replaces Kawasaki P/N: 32099-015 Our Part # 10929 Applications:- 73-75 Z1 900
- 76-77 KZ900
- Early KZ1000
- May fit others
-
Genuine Kawasaki, Used Kawasaki P/N: 32099-018 Applications:- 1976-1977 KZ900A based on the decal which shows 4 separate exhaust pipes/mufflers
- 1977-1980 KZ1000 LTD
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 32100-013 Application:- 1969-75 H1 500
-
New Old Stock Genuine Kawasaki P/N: 32100-016 Includes 92075-078 Rubber Applications:- 73-75 H1 500
-
Quality powder coated part. Has some minor pitting, as shown. OEM Kawasaki P/N: 32100-020 Includes NOS rubber grommets:- P/N: 92071-056
- P/N: 92075-078 (2)
- 76-77 KZ900A
- 76 KZ900 LTD
-
Powdercoated New Old Stock Includes:- Kawasaki P/N: 32100-100 (1) Band
- 92075-078 (4) Rubbers
- 77-78 KZ1000A
- 79-80 KZ1000 MkII
- 77-80 KZ1000 LTD
- 80 KZ1000 G (Z1 Classic)
- 78-80 Z1R
- Early KZ1000 Police
-
New Old Stock Genuine Kawasaki P/N: 32103-024 Applications:- 70-75 G4TRD
- G4 TRE
- G4 TR
- 76 KV100 A7
-
Genuine - Powder Coated Very nice reconditioned part Kawasaki P/N: 32105-005 Sold as Shown Applications:- 73-75 Z1 900
Item is eligible for free domestic shipping.
-
Genuine Kawasaki ~ Used, Powder Coated Kawasaki P/N: 32105-006 Applications:- 1976-1977 KZ900A
- 1976 KZ900 LTD
- KZ900 Police
-
Genuine Kawasaki Part ~ Used - Powder Coated Gloss Black This is a very nice air cleaner stay. It has been freshly powder coated by Ace Powder Coating! Kawasaki P/N: 32105-007 Applications: 77-80 KZ1000 A (KZ1000) 77-80 KZ1000 B (KZ1000 LTD) 78-81 KZ1000 C (Police 1000) 1978 KZ1000 D1 (Z1R) 1980 KZ1000 D3 (Z1R) -
Out of stock
Genuine Kawasaki ~ Used Grab bar is in pretty good condition, chrome is pitted as shown, minimal rust Kawasaki P/N: 32109-1016 Applications:- 81-83 KZ650 H (CSR)
- 80-83 KZ750 H1 (LTD)
- 82 KZ750 M1 (CSR)
-
New Old Stock Genuine Kawasaki P/N: 32112-005 Applications:- 73-75 S1
- 76 KH 250
-
This is a reconditioned original part, it has been freshly powder coated. Kawasaki P/N: 32113-003 Applications:- 76-77 KZ900A
- 1976 KZ900 LTD
-
Genuine Kawasaki Part ~ Used - Powder Coated Gloss Black This is a very nice battery box bracket. There is some minimal pitting on the bracket. The pitted areas will not show. Kawasaki P/N: 32113-004 Applications:- 77-78 KZ1000 A
- 77-79 KZ1000 LTD
- 1978 KZ1000 Police
-
Genuine Kawasaki Part - Used (reconditioned) Kawasaki P/N: 32122-010 This is a reconditioned original helmet holder. Bike takes Qty 2 Applications:- 76-77 KZ900A
- 1976 KZ900 LTD
- 73-75 Z1 900
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
-
Kawasaki P/N: 32122-057 Applications:- KZ650B B1-B3
- KZ650C C1-C3
- KZ650D D1-D2
- KZ650F1 May fit others
-
Genuine Kawasaki Part ~ Used - Powder Coated Gloss Black This is a very nice part for restoration or repair. Kawasaki P/N: 32129-001 Fits:- 73-75 Z1 900
- Z1 Police
-
Out of stock
Electrical Junction Box Genuine Kawasaki ~ Powder Coated Kawasaki P/N: 32129-006 Applications:- 76-77 KZ900 A
- 76 KZ900 B LTD
- KZ900 C
-
Out of stock
Quality OEM Kawasaki Part #32129-013 Nicely powdercoated by ACE Powdercoating Applications:- 77-78 KZ1000A
- 77-78 KZ1000 LTD
- Early 78 KZ1000 Police