- 85 KX 125
- 86 KXT250 Tecate
-
Out of stockHarley P/N: 33715-85A Applications:
- We believe to fit 85-99 EVO
-
This is a ready-to-go bolt-on kit, complete with Wiseco 1015 kit. Freshly-bored cylinder. A couple of minor blemishes as shown. Because of the small size of the blemish we didn't think it was necessary to fix it. This is the same setup we use on our restorations. Applications:
- 74-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
-
This kit contains all necessary OEM replacement parts to rebuild one front brake caliper assembly. Kit made in Japan. Our P/N: 32-1289 Replaces Kawasaki P/N:
- (1) 43054-003 Dust Seal
- (1) 43049-002 Piston Seal Ring
- (4) 43052-005 Dust Boot
- (4) 43053-006 O-Ring
- (1) 43057-003 Bleeder Cap
- 1976-77 KZ900A
- 1977-80 KZ1000A
- 1979-80 KZ1000B LTD
- 80 KZ1000D Z1R
- 1979-81 KZ1000C Police
- 1980 KZ1000-G1 Classic
- 1979-80 KZ1000E Shaft
-
Kawasaki P/N: 51001-1009-7V We bead blasted this tank to make sure it was able to accept emblems, as shown. Inside is nice, as shown. Outside has imperfections, as shown. Please keep in mind that the 78 KZ1000A takes a fuel valve that is held on with 2 bolts. Using the proper valve, this tank will fit: Applications:
- 73-75 Z1 900
- 76-77 KZ900A
- 77 KZ1000A
- (Correct for a 78 KZ1000A)
-
Factory Genuine Kawasaki Manual. By giving your motorcycle the proper care and maintenance outlined in this manual, you will be helping to ensure it a long, trouble-free life. Kawasaki P/N: 99920-1213-01 Condition: Used Pages clear and legible - light discoloration due to age. Covers shows wear. Overall nice, usable manual. Pages: 58 Print Date: 1982 Chapters:
- Specifications
- General Information
- Periodic Maintenance Chart
- Inspection and Adjustment
- Lubrication
- Disassembly
- Maintenance
- Appendix
- 1983 KX80 (KX 80-E1, KX 80-F1)
-
Please call with needs! Motor SC84E***0632 Frame SC04-2000361 Offering for parts only. Stock airbag, fenders are gooned, tires are rotted out. Kick starter okay, we are getting the points cover and right side cover polished. (not shown in photos). Chain guard pretty good. Intake manifolds are junk, dyna cover has been scratched, seat lock is bad, side covers are okay. Wiring harness must be tested. Seat lock is bad. Still good parts on this bike, and some are interchangeable with the KZ1000.
-
Call with needs! 44,670 Miles on the odometer 10 speed, shaft drive. Many parts are not genuine. We purchased this bike because we needed parts off if it for another project. Motor is stuck. Dual-range transmission. Wheels are okay, tank is fair. Has some decent parts on it. One of the fork tubes has been goofed. Exhaust has been repaired. Carbs are not complete, missing the top. Tank needs attention, could be cleaned. Seat is goofed, as shown. Sitting as is, it needs a lot of work. THE TANK HAS BEEN SOLD 10/22
-
Before starting to ride your motorcycle, please read this manual thoroughly in order to know your motorcycle's capabilities, its limitations, and above all, how to operate it safely. Kawasaki Manual P/N: 99920-1165-01 CONDITION: USED. All pages nice, clear, and legible; light discoloration; some with light fingerprints or marks. Little wear or dirt to the edges. Cover showing little wear or dirt from use, handling, and storage. *As we have multiple copies of this item, you may or may not receive the one shown in photos. They are in similar condition. Nice manual! Models Covered:
- 1982 KDX250-B2
-
Out of stockSold as set of 2. These shock lowers were removed from a KZ1000A. Sold as shown, no returns. Applications:
- 73-75 Z1 900
- 76-77 KZ900A
- More
-
Out of stockGenuine Kawasaki P/N: 27005-5019 Comes with 2 keys. Applications:
- 81-82 KZ1000K LTD
- 81-82 KZ1000J
- 82 KZ1000R Eddie Lawson Replica
- 81 KZ1100B GPZ1100
- And more
-
Genuine Kawasaki Accessory NOS Kawasaki Part ~ New Old Stock Fitted Leather Bike Chaps that mount to engine guards. Helps protect rider in bad weather. Embossed with V-Wing logo. Kawasaki P/N: K53000-153C Application:
- 96-04 Vulcan 800 Classic
-
Out of stockRear Wheel- USED Kawasaki P/N: 41073-1333-T6 Comes with rear sprocket carrier. The rim is not bent. Paint is not perfect. Applications:
- 1986 EX250 E1 Ninja
- 1987 EX250 E2 Ninja
-
Genuine Kawasaki Part ~ Used Kawasaki P/N: 39060-1133 We purchased a group of parts from a race team which included this radiator. It has hoses, as shown. Has block off fan switch, as shown. We have not tested this unit, but it does not appear to have any major damage. Applications:
- 1996 ZX7 RR
- 97-03 ZX7-R
-
Out of stockNew Old Stock Genuine Kawasaki P/N: 92091-024 Superseded P/N: 92091-020 Applications:
- 69-75 H1 500
- 76 KH 500
- 72-75 H2 750
-
Sale!New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23006-014 Superseded P/N: 756831-7112 5 1/2" diameter Applications:
- 1970 F3 BUSHWHACKER
- 1970 F4 SIDEWINDER
- 1970 F5 BIGHORN
- 1972 F8-A
-
Out of stockRear Chain Adjuster with Bolt and Nut Genuine Kawasaki P/N: 33040-063 The chain adjusters have been re-plated Washers on inside 10mm thread Sold as a set of 2 Applications:
- 74-Mid 75 Z1 900
-
Out of stockFront Single Disc Brake Hose V-Twin # 23-0732 Replaces Harley OEM # 45521-74A Made in U.S.A. Application:
- 74-77 XL, FX
-
Parting out a Suzuki GS1100G which had been wrecked. We have not tested the transmission. Hear it turn over in the video. Dyno cover has been smashed. Head is nice. Some crash marks where the exhaust hit the head. Nothing really bad. WE HAVE NO TITLE. SELLING FOR PARTS ONLY! We have some extras; the seat, rear grab bar, side covers, front brake rotors, rear wheel. As always, possible low-cost shipping upon request.
-
Out of stockHarley P/N: 54509-73 12 1/2" eye-to-eye center Application:
- 73 - Early 80's FX