-
Chassis built in 1977. Unique bike, restored with real attention to detail. New brake lines, shock bolts, sealed battery, solid state regulator rectifier, K&N filters, breather filter. Rebuilt carbs, vapor blasted engine cases, polished covers, replaced bolts and hardware, rebuilt brakes, new starter switch, Bator forks, Mulholland shocks, matched powder coated center and side stand, polished breather, foot peg rubbers, center stand stopper, polished chain guard, refurbished gauges. Some cracking and damage on original tailpiece as shown. See the full restoration story below. Buyer is responsible for arranging shipping. Local Pickup is encouraged. -
Out of stock
KZT00AE 007422 Plug-in motor. Came out of a bike with 15,000 miles on it, which had been sitting a while. No broken fins. Vapor blast, polished aluminum covers, cam chain, clutch bearing, valve set, valve seals, piston ring, cam chain guide, case O-ring, front sprocket lock tab, alternator grommet, stator repair kit, oil level window, cam chain roller rubber, top roller rubber and pin, tachometer gear seal and O-ring, head cover bolt, exchange bolt and screw, cam cover plug, gasket set, Shim exchange and spark plugs. Will fit in Z1 900, 77-78 KZ1000. Very nice motor. Please contact us for details or for a shipping quote: 330-335-7365 -
We restored this bike for the customer about 15 years ago from the ground up. He never rode it and we subsequently purchased it from him. This bike was done back when NOS parts were readily available. Front wheel is NOS. Front fender has some slight damage as shown. We installed an extra fuel valve. Transmission has high / low gearing feature. Runs very nice. Everything works. 3412 miles, comes with clean title. Great bike for display. Great to bring along camping, not too loud. Please call if interested. -
- Missing Windshield
- Dunstall Kit
- From our showroom
- Contact us for details
-
1997 Honda Goldwing GL1500. 21,712 Miles. VIN #___________ Bike was donated by the original owner to the Salvation Army. We picked it up, serviced it, oil change, etc, and are liquidating it for the Salvation Army. These touring bikes have a lot of extras. This one in particular comes with both a lower windshield (installed,) and the original tall windshield. Bike runs really nice. Many accessories. Includes original owners manual with maintenance records, complete tool kit. Has AM/FM cassette, CB and intercom system. Front and rear mic hookups. Radio sounds good. Power windshield for raising and lowering on the fly, as well as adjustable headlamp. A really nice feature is a reverse gear to get out of tight parking spots. Lots of storage compartments for both rider and passenger. Everything works. One key lock unlocks the trunk and both saddlebags. 3 Hondaline bag liners are included. There is a hidden zippered compartment in the lower passenger backrest that stores a smaller rain cover for the seat to use during rainy rest stops. Full bike cover is included. Possible low-cost shipping between Ohio and CT over the holidays! -
Out of stock
Comes with complete 1015 kit from Wiseco. We use these kits on all of our restorations. -
Out of stock
Genuine Kawasaki Z1 900 903 cylinder has been heat-treated powder coated. Comes with complete 1015 kit from Wiseco. This year does not take the center O-ring that the 74-75 take. Each piston is marked their respective cylinders. No 2 pistons are alike. 70mm. We use these kits on all of our restorations. *Optional enhancement, if you would like we can file the black from the edges of the fins to appear as the originals came.
-
Out of stock
This is a ready-to-go bolt-on kit, complete with Wiseco 1075 kit. Freshly-bored cylinder. No broken fins. This is the same setup we use on our restorations. Applications:- 76-77 KZ900
- 77-80 KZ1000
- 73-75 Z1 900
-
Out of stock
Quality reproduction exhaust system P/N: OSVP059 Applications:- 73-75 Z1 900
- 76 KZ900
-
This is a ready-to-go bolt-on kit, complete with Wiseco 1015 kit. Freshly-bored cylinder. A couple of minor blemishes as shown. Because of the small size of the blemish we didn't think it was necessary to fix it. This is the same setup we use on our restorations. Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
-
Out of stock
This kit is for 77-80 KZ1000A, but will also work on Z1R, KZ1000A LTD or Z1 900. Cylinder head has been fitted with brand new cylinder sleeves from Wiseco. Includes 1015 Kit from Wiseco, piston 1-4, all marked, pistons, rings, pins, and clips, as well as gaskets. This is a bolt-on kit, ready to go. No broken fins on the cylinder. Applications:- 77-80 KZ1000A
- Z1R KZ1000A LTD
- Z1 900.
-
P/N: K1075 Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for each application. Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Kit Includes:- 4 Cylinder sleeves
- 4 Pistons
- 4 Ring sets
- 4 Piston pins
- 8 Circlips
- Base gasket
- Head gasket
- Z1 900
- KZ1000
-
Frame # JKAZNBB14FB502477 Eng # KZT10AE024423 We are parting this bike out. It has a couple of issues; under the head by the cam cover has a small crack, as shown. The carbs are off of a KZ1000 J. Exhaust is different, not stock and has no baffle. Brakes in front not bad; rear brakes are locking up. No broken fins. We will separate. Bike has a title. Due to our Ohio weather, it has not been test ridden. New oil, filter, spark plugs. Will run as shown in video. Charging system does not work. Has a lot of good parts, or you can buy this and fix it up. Please call us if interested. 330-335-7365 -
FRAME# JKAKZBB14CAO12810 ENG# KZ8T10BE012738 Purchased this basket case GPZ along with a Kawasaki Z1. This came from an estate, and it came in boxes. The frame does not appear to be bent. The originals sticker is on the frame and we have a title with this bike. Crank feels okay, probably should be inspected. 18" rear wheel is complete with rotor and sprocket carrier. Rim is nice and straight, not bent. Rear inner fender is intact, with electrical connections. Side stand, 19" wheel is complete and rim is not bent. Cylinder head no broken fins but incomplete, only one cam cap and no cams. Exhaust studs look nice, fuel injection looks good, combustion chambers look good. Fuel injection unit, air box, (only one air box side over), we think the front sprocket cover is correct, brake parts, extra caliper, tail light, handlebars, (one may be bent), mirror, fuel sending unit, gauge, sprocket, ignition switch with key, clutch push rod (bent). See video for details. Sold as shown. Low cost shipping available. FRAME HAS BEEN SOLD, ALONG WITH SWING ARM -
Out of stock
Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 127-61001 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
Out of stock
Genuine Kawasaki Z1 900 903 cylinder has been freshly bored and vapor blasted. Each piston is marked their respective cylinders, as no 2 pistons are alike. Very nice assembly. Kit contains:- 11005-136-2H OEM cylinder (1)
- 13029-058 Piston 0.50 (4)
- 13025-046 Ring (4)
- 13002-022 Pin (4)
- 92036-021 Clip (8)
- 74-75 Z1 900
- 76-77 KZ900A
- 76 Z1 900 LTD
