- 1976-1977 KZ900 A4-5
- 1976 KZ900 B1 LTD
- 1977-1978 KZ1000 A1-2
- 1977-1978 B1-2 LTD
-
Genuine Kawasaki ~ Used ~ Powder Coated ~ Semi-Gloss Kawasaki P/N's: 44037-098 Steering Stem (2) 92003-064 Bolt (2) 461F1200 Washer Applications: -
Our P/N:DC1-1 This coil set is 3-OHM Great for use with electronic ignition. Wires available. Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
- Will work on others
-
The DYNA S Electronic Ignition System was designed as a points replacement. Totally self-contained for easy installation. All components fit under the point cover, replacing the original points. It is designed for use with stock OEM, or other coils, or combinations of coils that have at least 3-ohms primary resistance. No more points to set! Our P/N DS2-1 Applications:- 73 - 75 Z1 900
- 76 - 77 Kz900
- 77 - 81 Kz1000
-
Out of stock
GENUINE KAWASAKI Nicely Polished Hub Notice no Rib in Webbing Kawasaki P/N: 42008-013 CORRECT FOR:- 1973 Z1 900
- 74-75 Z1 900
- 76-77 KZ900
-
Out of stock
This is a very nice polished, early edition clutch cover. Has some minor scratches from shelf life. This would be a perfect addition for your favorite bike. It is lighter in weight than the late model cover. We believe this is for 73-76 because of the thinner ribs on the inside. Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 76 Kz900B LTD
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- 14032-082 cover (supersedes to 14032-121)
- 52015-004 oil gauge window
- 14046-024 gasket
-
Out of stock
This genuine Kawasaki cam cover has been vapor blasted and polished on the ends. Comes with 92003-092 cam cover bolts and 11023-006 gasket. Applications: Correct for:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
- 77-78 KZ1000
-
Out of stock
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 13161-029 Applications:- 76-77 KZ900
- KZ900 LTD
- KZ900 Police
- 73-75 Z1900
- 78+80 Z1R
- 80 KZ1000G, Z1 Classic
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- Early KZ1000 Police
-
Freshly Powder Coated. Nice Genuine Parts. OEM Kawasaki P/N: 34011-029 Superseded P/N: 34011-1015 Contains the following Kawasaki P/N's:- 34011-029 Stand OEM powder coated
- 34023-012 Spring
- 34019-014 Bolt
- 92016-044 Nut
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1980 KZ1000A
- Early KZ1000 Police
- 1980 Z1R
-
Kawasaki P/N: 51001-1009-7V We bead blasted this tank to make sure it was able to accept emblems, as shown. Inside is nice, as shown. Outside has imperfections, as shown. Please keep in mind that the 78 KZ1000A takes a fuel valve that is held on with 2 bolts. Using the proper valve, this tank will fit: Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77 KZ1000A
- (Correct for a 78 KZ1000A)
-
Quality reproduction part Replaces OEM Kawasaki P/N: 44013-037 Set of 2 Fork Tubes Applications:- 76-77 KZ900A
- 76 KZ900 LTD
- 73-75 Z1 900
- 77 KZ1000 A
-
Out of stock
These NOS stands came from an older inventory. There was some small damage from poor shelf life, so they have been freshly powder coated. OEM Kawasaki P/N: 34011-029 Superseded P/N: 34011-1015 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1980 KZ1000A
- Early KZ1000 Police
- 1980 Z1R
-
No broken tabs. Needs a little work at the emblem area, as shown. Applications:- 76 KZ900 LTD
- 76-77 KZ900A
-
Out of stock
NOS Kawasaki front spoke set, complete with nipples. Includes (20) 41028-084 (outer) and (20) 41027-085 (inner) Applications:- 76-77 KZ900A
- 77-78 KZ1000A
- 76-79 KZ750B
- 76 KH500A
- Will fit others
-
GENUINE KAWASAKI Nicely Polished Hub with new Seal and Bearing. Kawasaki P/N: 42008-013 Includes: 601B6206 Bearing, 92050-027 Seal APPLICATIONS:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
-
Out of stock
Genuine Kawasaki - Used Polished, very nice kit. Kawasaki P/N's: 11022-005-2H Cylinder Head Cover Replaces 92003-092 Cam Cover Bolt Set Replaces 11023-006 Gasket Applications:- 73-75 Z1 900
- 76-77 KZ900
- Will work on 77-78 KZ1000
-
Nicely powder-coated battery box. Includes 92071-056 rubber grommet. Applications:- 76-77 KZ900A
- 76 KZ900 LTD