- (2) 6203 bearing
- (2) 92050-003 seal
- 77-80 KZ1000
- 78-80 KZ1000D / Z1R
- 76-77 KZ900
- 77-80 KZ650
- 78-79 KZ400B
-
Kit comes with three seals, as shown. Choose according to your model. Kit contains: -
Bearings to fit rear brake hub and sprocket carrier. Kit P/N: 0215-0830 Replaces Kawasaki P/N's: 1) 601B6304Z Bearing 1) 601B6304 Bearing 1) 601B6206 Bearing 1) 92050-027 Seal Applications:- 1972-1975 H2 750
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- May fit others
-
Replaces Kawasaki P/N: 16099-002 Applications:- 73-75 Z1 900
- 76-77 KZ 900
- 77-81 KZ 1000
-
3 separate gaskets. Copper gaskets are .010 thick, with cylinder sleeve holes measuring 3.5". The mylar gasket has 3.25" holes. These may not go together. All 3 gaskets sold as a single item. Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
-
Left Engine Cover Stater Replacement Grommet Applications:- 73-75 Z1 900
- 78 & 80 Z1R
- 76-77 KZ 900A
- 76 KZ 900 LTD
- 77-80 KZ 1000 LTD
- KZ 1000G Z1 Classic
-
Out of stock
Genuine Kawasaki Z1 900 903 cylinder has been freshly bored and vapor blasted. Each piston is marked their respective cylinders, as no 2 pistons are alike. Very nice assembly. Kit contains:- 11005-136-2H OEM cylinder (1)
- 13029-058 Piston 0.50 (4)
- 13025-046 Ring (4)
- 13002-022 Pin (4)
- 92036-021 Clip (8)
- 74-75 Z1 900
- 76-77 KZ900A
- 76 Z1 900 LTD
-
This is a ready-to-go bolt-on kit, complete with Wiseco 1015 kit. Freshly-bored cylinder. A couple of minor blemishes as shown. Because of the small size of the blemish we didn't think it was necessary to fix it. This is the same setup we use on our restorations. Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
-
Quality Reproduction Gasket, Made in U.S.A. OEM Kawasaki P/N: 11009-030 Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
-
Quality reproduction part which replaces oil pressure sending unit boot, which Kawasaki does not offer separately. P/N: 11013 Applications:- 73-75 Z1 900
- 1976-77 KZ900
- 1977-78 KZ1000
- May fit others
-
Out of stock
This genuine Kawasaki cam cover has been vapor blasted and polished on the ends. Comes with 92003-092 cam cover bolts and 11023-006 gasket. Applications: Correct for:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
- 77-78 KZ1000
-
Out of stock
Genuine Kawasaki - Used Polished, very nice kit. Kawasaki P/N's: 11022-005-2H Cylinder Head Cover Replaces 92003-092 Cam Cover Bolt Set Replaces 11023-006 Gasket Applications:- 73-75 Z1 900
- 76-77 KZ900
- Will work on 77-78 KZ1000
-
Quality Aftermarket Gasket Replaces Kawasaki P/N: 11023-006 Applications:- Z1 900
- KZ900 All
- 1977-1978 KZ1000 All
-
Out of stock
Quality re-manufactured stator coil wiring harness Applications:- 73-75 Z1 900
- 78 & 80 Z1R
- 76-77 KZ 900A
- 76 KZ 900 LTD
- 77-80 KZ 1000 LTD
- KZ 1000G Z1 Classic
-
ONE YEAR WARRANTY American Made Bolt Kit Kit consists of:- (13) 110B0625
- (3) 110B0635
- (1) 110B0650
- 1973-1975 Z1
- 1977-1980 KZ1000
- 1976-1977 KZ900A
- May fit Others
-
Quality replacement part. Replaces Kawasaki P/N: 110B0816 Our Part # 10561 Consists of:- (4) 110B0816 bolt
- (4) 461F0800 spring washer
- Z1900
- KZ900
- H2 750
- Early KZ1000
- May fit others
-
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
Quality reproduction part Manufacturer P/N: 11103 Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-78 KZ1000
- May fit others
-
Quality reproduction parts. Kit contains all bolts and spacers to mount the engine. Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-80 KZ1000 LTD
- 78+80 Z1R
- 77-80 KZ1000A
-
Replaces Kawasaki P/N: 113B1256A Superseded P/N: 92001-1262 Replated part - each may look different Applications:- 73-75 Z1
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ1000 G (Z1 CLASSIC)
- 79-80 KZ1000 SHAFT
- 78 & 80 Z1R
- KZ1000 Police (Early)
- 77-80 KZ1000 LTD
- 77-80 KZ1000 A
-
Out of stock
Genuine Replated Kawasaki Part Head: Plain with stamped dot Kawasaki P/N: 113B1256A Applications:- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 80 KZ1000G Classic
- 79-80 KZ1000 Shaft
- Z1R
- 77-80 KZ1000
-
Quality re-manuactured part made in the U.S.A. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-126 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Out of stock
Quality re-plated original part. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-1265 Applications:
- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Kit contains: 2) 113N1035, 2) 461F1000 Part Number: 113N1035 Application:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B
- 72-75 H2 750
- 69-75 H1 500
- 1976 KH500-A8
- 78-80 KZ1000D Z1R
- 77-80 KZ1000A
- Many others
-
QUALITY USA MADE Replaces Kawasaki P/N: 114B1025 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000C POLICE
- 80 KZ1000 G CLASSIC
- 72-75 F9
- 73-75 F11
- 70 F5
- 71 F81M
- 72 F8
Item is eligible for free domestic shipping.
-
Quality Reproduction Made in Japan Replaces Kawasaki P/N: 12004-012 Applications:- 73-75 Z1 900
- 73-75 Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 Police
Item is eligible for free domestic shipping.
-
New, High Quality Reproduction Replacement Valves Made in Japan. Kit contains 4 intake valves & 4 exhaust valves. Replaces Kawasaki P/N: 12004-012 Intake (4) 12005-005 Exhaust (4) Our P/N: 10155 Applications:- 73-75 Z1 900
- 73-75 Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 Police
Item is eligible for free domestic shipping.
-
New, High Quality Reproduction Replacement Valve Made in Japan. Replaces Kawasaki P/N: 12005-005 Applications:
- 73-75 Z1 900
- 73-75 Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 Police
Item is eligible for free domestic shipping.
-
Reproduction part. Replaces Kawasaki P/N: 12006-010 Superseded P/N: 12013-001 Applications:- 73-75 Z1 900
- KZ900
-
Reproduction part. Replaces Kawasaki P/N: 12006-011 Superseded P/N: 12013-002 Applications:- 73-75 Z1 900
- KZ900
-
New Kawasaki Genuine Shim ~ New Old Stock Kawasaki P/N: 12037-015 Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 1976 Kz900B Ltd
- 77-80 Kz1000A
- 77-80 Kz1000B Ltd
- 78-81 Kz1000C Police
- 78 & 80 Kz1000D Z1R
- 79-80 Kz1000E Shaft
- 1980 Kz1000-G1 Classic
- 81-83 Kz1000J
- 81-82 Kz1000K Ltd
- 81-82 Kz1000M CSR
- 82-83 Kz1000R Eddie Lawson Replica
- 81-83 Kz1100A Shaft
- 81-82 Kz1100B GPz
- 82-83 Kz1100D Spectre
-
Kawasaki P/N: 12037-022 Applications:-
1973-1975 Z1 900
-
1976-1977 Kz900A
-
1976 Kz900B Ltd
-
1977-1980 Kz1000A
-
1977-1980 Kz1000B Ltd
-
1978-1981 Kz1000C Police
-
1978 & 1980 Kz1000D Z1R
-
1979-1980 Kz1000E Shaft
-
1980 Kz1000-G1 Classic
-
1981-1983 Kz1000J
-
1981-1982 Kz1000K Ltd
-
1981-1982 Kz1000M CSR
-
1982-1983 Kz1000R Eddie Lawson Replica
-
1981-1983 Kz1100A Shaft
-
1981-1982 Kz1100B GPz
-
1982-1983 Kz1100D Spectre
-
-
Nice used camshaft set, includes sprockets and bolts, as shown. Genuine Kawasaki P/N's: 12044-014 Intake- Superseded from 12044-004
- Superseded from 12044-005
- 74-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ900 Police
- 77-80 KZ1000 A
- 80 KZ1000 G (Z1 Classic)
- 78-81 KZ1000 Police
- 79-80 KZ1000 E (Shaft)
- 78 & 80 KZ1000 D (Z1-R)
-
Out of stock
Kawasaki P/N: 12049-1003, replaces 12047-003 Applications:- 73-75 Z1
- 78 Z1R
- Early KZ1000 Police
- 77-78 KZ1000 LTD
- 77-78 KZ1000
- 76-77 KZ900 A
- 76 KZ900 LTD
- Early KZ650
-
Quality Japanese manufactured part Our P/N: 10607 Replaces P/N: 12053-001 Superseded # 12053-019 Applications:- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 80 KZ1000G / Z1 Classic
- 78 and 80 Z1R
- KZ1000 Police up to 81
- 79-80 KZ1000E
-
Quality reproduction part made in Japan. Replaces Kawasaki P/N: 12055-002 Applications:- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 78+80 Z1R
- 79-80 KZ1000E
- 80 KZ1000G Z1 Classic
- 75-81 KzZ1000 Police
-
Out of stock
Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 127-61001 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
Out of stock
Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 128-61001 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
Reproduction 1st Over Piston Kit 66.5 mm Kit consists of:- 4) 13029-058 Pistons
- 4) 13025-046 Rings
- 4) 13002-022 Piston pins
- 8) 92036-021 Circlips
- 73-75 Z1 900
- 76-77 KZ900
-
Quality reproduction part made in Japan. Replaces Kawasaki P/N: 13058-044 Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000 A, B, C, G1
-
This is a rare, early production pedal boss. New Old Stock Kawasaki P/N: 13061-014 Superseded P/N: 13061-017 Applications- 1973-1975 Z1 900
- 1976-1977 KZ900 A
- 1977-1980 KZ1000 A
- 1977-1981 KZ1000 B
- 1978-1981 KZ1000 C Police
-
Genuine Kawasaki - Used Early edition- shaft is half hollow, as shown. Kawasaki P/N: 13066-029 Kickstart Shaft 13078-011 Kickshaft Ratchet 13068-028 Kickstarter Gear 92028-126 Kickshaft Collar Applications:- KZ750 B
- KZ900 A
- KZ900 LTD
- Z1 900
- 77 KZ1000 LTD
- 77 KZ1000 A
Item is eligible for free domestic shipping.
-
New Old Stock Genuine Kawasaki P/N: 13072-012 Applications:- Z1 900
- KZ1000
- KZ900
- KZ750
- KZ400
-
Quality set of 8 Clutch Plates Made in United Kingdom EBC P/N: CK4409 Replaces OEM P/N: 13088-030 Applications:- 73-75 Z1
- 76-77 KZ900
- 80 KZ1000G
- 78 & 80 Z1R
- 77-80 KZ1000
- KZ650
- Will work on others
-
Out of stock
Kawasaki P/N: 13089-022 Due to the age - some might show signs of rust starting Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900
- 1978-1980 Z1R
- 1977-1980 KZ1000
- KZ650 and more
-
New Old Stock Genuine Kawasaki P/N: 13102-013 Applications:- 1973-1975 Z1
- 1976-1977 KZ900
- 1974-1977 KZ400
- 1978 KZ400 A2
- 1977-1978 KZ1000
-
New Old Stock Kawasaki P/N: 13116-022 Applications:- Most KZ650 models, 77-79
- KZ700
- ZN700
- KZ750B, 76-79
- Early KZ750 4-cylinder
- 76-77 KZ900A
- KZ900 LTD
- 73-75 Z1900
- KZ1000A 77-80
- KZ1000 LTD 77-80
- KZ1000 Police < 81
- 78 + 80 Z1R
- KZ1000 G (Z1 Classic)
- 79-81 KZ1300A
- 80 KZ1300B Touring
- May work on others
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 13129-046 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E Shaft
- 1980 KZ1000-G1 Classic