- KZ1000
- KZ750
- KZ650
- and more
-
New Old Stock Genuine Kawasaki P/N: 21131-004 Sold as a set of 4 Applications: -
New Old Stock Kawasaki P/N: 92042-014 Applications:- 1973-1975 Z1
- 1976-1977 KZ900
- 1977-1980 KZ1000
- and more
-
New Old Stock Kawasaki P/N: 92042-020 Applications:- 1973-1975 Z1
- 1976-1977 KZ900
- 1977-1980 KZ1000
- and more
-
New Old Stock Genuine Kawasaki P/N: 13102-013 Applications:- 1973-1975 Z1
- 1976-1977 KZ900
- 1974-1977 KZ400
- 1978 KZ400 A2
- 1977-1978 KZ1000
-
New Old Stock Kawasaki P/N: 92043-079 Applications:- 1973-1975 Z1
- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1977-1980 KZ1000A and LTD
- and more
-
New Old Stock Genuine Kawasaki P/N: 92043-126 Applications:- 1976 KH250
- 1976-1978 KH400
- 1976 KH500
- 1976-1977 KZ900A
- 1977-1978 KZ1000A
- 1977-1980 KZ1000 LTD
- 1980 KZ1000G Z1 Classic
-
New Old Stock Genuine Kawasaki P/N: 92043-127 Applications:- 1976 KH250
- 1976-1978 KH400
- 1976-1977 KZ900A
- 1976 KZ900B
- 1977-1978 KZ1000A
- 1977-1980 KZ1000 LTD
- 1980 KZ1000G Z1 Classic
-
New Old Stock Genuine Kawasaki P/N: 26009-003 Applications:- 73-75 Z1 900
- 77-78 KZ1000A
- Others
-
Not all will look 100% alike, as we have many and they are over 40 years old. Very nice condition. Applications:- Z1R
- KZ1000 LTD
-
New Old Stock Genuine Kawasaki P/N: 12007-012 Applications:- 77-78 KZ1000A
- 73-75 Z1 900
-
Out of stock
Quality reproduction part Replaces OEM P/N: 43015-1009 Applications:- 77-79 KZ650B
- 78-79 KZ650C Custom
- 78-79 KZ650D
- 79-80 KZ1000A
- 78-80 KZ1000B LTD
- 78-80 KZ1000C Police
-
This Genuine Kawasaki part has been re-plated. Kawasaki P/N: 42036-024 Applications:- 1977-78 KZ1000A
- 1976-79 KZ750B
-
ZINC Re-plated Front Brake Caliper Shaft Bolts Includes Kawasaki P/N:- 43045-006 Bolts (2)
- 43040-004 Spacer (1)
- 76-77 KZ900 All
- 77-80 KZ1000 All
- 76-79 KZ750B Twin
- 77-79 KZ650 All
- Will fit others
-
Replated OEM Part Kawasaki P/N: 92022-248 4.38mm thickness -
Set of 4 Air Duct Rubbers. Quality reproduction parts. Kit consists of:- 14073-1022 (1)
- 14073-1023 (2)
- 14073-1024 (1)
- 76-77 KZ900
- 77-80 KZ1000
-
Out of stock
These NOS stands came from an older inventory. There was some small damage from poor shelf life, so they have been freshly powder coated. OEM Kawasaki P/N: 34011-029 Superseded P/N: 34011-1015 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1980 KZ1000A
- Early KZ1000 Police
- 1980 Z1R
-
Out of stock
Quality reproduction exhaust collars. Set of 8. Replaces Kawasaki P/N: 92027-170 Applications:- 73-75 Z1 900
- 76-77 KZ900 All
- 77-80 KZ1000 All
-
Re-plated part. Genuine Kawasaki P/N: 34036-001 Superseded P/N: 32054-1021 Applications:- 77-78 KZ1000A
- KZ1000 MkII
- KZ400
- And more
-
New Old Stock Genuine Kawasaki P/N: 34036-001 Superseded P/N: 32054-1021 Applications:- 77-78 KZ1000A
- KZ1000 MkII
- KZ400
- And more
-
New Old Stock Genuine Kawasaki P/N: 92075-174 Applications:- KE125
- KZ400
- KZ440
- KZ650
- KZ750
- KZ900
- Z1 900
- KZ1000
- KZ1100
- And more
-
Quality reproduction P/N: 10483 Replaces P/N: 92024-044 Applications:- 73-75 Z1 900
- 77-78 KZ1000A
- And others
-
Replaces Kawasaki P/N: 23048-012 Superseded P/N: 23048-1024 Applications:- Z1 900
- KZ900
- KZ1000 1978 and down
- KZ400
- KZ650
- Many more
-
New Old Stock Genuine Kawasaki P/N: 92027-1103 Applications:- KE100
- KM 100
- KE125
- KE175
- KE250
- KZ650
- 77-80 KZ1000A
- 77-80 KZ1000B
- May fit some KZ1000C Police
- 1980 KZ1000D / Z1R
- 79-80 KZ1000E Shaft
-
Out of stock
Quality reconditioned part, includes NOS gaskets and seals. Cover is in good condition. Has some chain marks, as shown. OEM Kawasaki P/N: 14024-007 Kit Includes:- 14024-007 Transmission cover
- 14058-004 Gasket
- 92050-024 Seal
- 92049-004 Seal
- 92050-048 Seal
- 73-75 Z1 900
- KZ1000
-
3 separate gaskets. Copper gaskets are .010 thick, with cylinder sleeve holes measuring 3.5". The mylar gasket has 3.25" holes. These may not go together. All 3 gaskets sold as a single item. Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
-
Vesrah P/N: NK-4002 Replaces Kawasaki P/N: 11009-1208 Applications:- 81-87 KZ1000
- 81-83 KZ1100
- 84-85 ZN1100B
- 83-85 ZX1100A
- May fit others
-
Out of stock
This is an NOS Wiseco .040 thick fiber big bore base gasket. Cylinder liner openings measure 3.25" Applications:- 73-75 Z1 900
- KZ900
- KZ1000
- (Models with big bore sleeves)
-
Out of stock
Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 127-61001 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
Out of stock
Nice chrome cover came from an older inventory we purchased. We estimate the chrome is about 20 years old. Very nice shape. OEM Kawasaki P/N: 14026-039-80 Comes with P/N: 14026-012 Chain oiler cover, as shown. Applications:- 77-78 KZ1000A
- 78 Z1R
- 77-78 KZ1000B (LTD)
-
Brake hub assembly, restored with new bearings, seal and polish job.. Chrome has some very minor pitting, as shown. Applications:- 77-78 KZ1000A
-
Out of stock
This is a very nice restored rear wheel. OEM Kawasaki P/N: 42048-042 Date code: 7D Applications:- 77-78 KZ1000A
-
This kit is for 77-80 KZ1000A, but will also work on Z1R, KZ1000A LTD or Z1 900. Cylinder head has been fitted with brand new cylinder sleeves from Wiseco. Includes 1015 Kit from Wiseco, piston 1-4, all marked, pistons, rings, pins, and clips, as well as gaskets. This is a bolt-on kit, ready to go. No broken fins on the cylinder. Applications:- 77-80 KZ1000A
- Z1R KZ1000A LTD
- Z1 900.