-
Comes with complete 1015 kit from Wiseco. We use these kits on all of our restorations. -
Out of stock
Genuine Kawasaki Z1 900 903 cylinder has been heat-treated powder coated. Comes with complete 1015 kit from Wiseco. This year does not take the center O-ring that the 74-75 take. Each piston is marked their respective cylinders. No 2 pistons are alike. 70mm. We use these kits on all of our restorations. *Optional enhancement, if you would like we can file the black from the edges of the fins to appear as the originals came.
-
Out of stock
This is a ready-to-go bolt-on kit, complete with Wiseco 1075 kit. Freshly-bored cylinder. No broken fins. This is the same setup we use on our restorations. Applications:- 76-77 KZ900
- 77-80 KZ1000
- 73-75 Z1 900
-
This is a ready-to-go bolt-on kit, complete with Wiseco 1015 kit. Freshly-bored cylinder. A couple of minor blemishes as shown. Because of the small size of the blemish we didn't think it was necessary to fix it. This is the same setup we use on our restorations. Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
-
This kit is for 77-80 KZ1000A, but will also work on Z1R, KZ1000A LTD or Z1 900. Cylinder head has been fitted with brand new cylinder sleeves from Wiseco. Includes 1015 Kit from Wiseco, piston 1-4, all marked, pistons, rings, pins, and clips, as well as gaskets. This is a bolt-on kit, ready to go. No broken fins on the cylinder. Applications:- 77-80 KZ1000A
- Z1R KZ1000A LTD
- Z1 900.
-
Out of stock
Genuine Kawasaki Z1 900 903 cylinder has been freshly bored and vapor blasted. Each piston is marked their respective cylinders, as no 2 pistons are alike. Very nice assembly. Kit contains:- 11005-136-2H OEM cylinder (1)
- 13029-058 Piston 0.50 (4)
- 13025-046 Ring (4)
- 13002-022 Pin (4)
- 92036-021 Clip (8)
- 74-75 Z1 900
- 76-77 KZ900A
- 76 Z1 900 LTD
-
We believe these heads are for the 1971 Sportster. May fit others. They appear to be in very nice shape. Came from a 1971 with a blown transmission. One fin may have some damage. Chrome is not nice on the rocker boxes, as shown. Watch movie for a closer look: Harley P/N:- 16673-71 Front
- 16674-71 Rear
-
New Old Stock Kawasaki P/N: 11005-051 Center cylinder, Type 2 The perfect part for the perfect bike Application:- Late 69-72 H1 500
-
We are parting out a 71 Sportster. According to our parts book, these will fit 70-71, may fit others. No broken fins, comes with used piston & rings. Harley P/N's:- 16464-70
- 16465-70
-
Nice used crankshaft. Kawasaki P/N: 13031-056 Applications:- 77 KZ1000A
- KZ1000 LTD
-
Reproduction 1st Over Piston Kit 66.5 mm Kit consists of:- 4) 13029-058 Pistons
- 4) 13025-046 Rings
- 4) 13002-022 Piston pins
- 8) 92036-021 Circlips
- 73-75 Z1 900
- 76-77 KZ900
-
Used KZ1000 crankcase with no damage. Bottom only with shift drum ad shift fork. Kawasaki P/N: 14001-107-2J Application:- 77-78 KZ1000
- May fit others
-
Out of stock
Kawasaki P/N: 13031-1006 This one-year-only crankshaft is in nice shape. Rods and bearings feel good. No flywheel key. 10mm rotor bolt. Applications:- 78 KZ1000A
- 78 KZ1000 LTD
- 78 Z1R
-
Genuine Kawasaki Parts ~ Used This is correct for 1975 Z1 900 (Shift pattern numbers were stamped smaller) but will work on 1974 and up. Great part for the restored bike. Includes Kawasaki P/N:- 14026-026 Chain Cover (1)
- 14026-012 Inspection Cover
- 14045-012 Gasket
- 220B0612 Screws (2)
- 74-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14026-039-80 Cover 14026-012 Cover 14045-015 Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1978 Z1R
- 1978 KZ1000 Police
-
Out of stock
Nice chrome cover came from an older inventory we purchased. We estimate the chrome is about 20 years old. Very nice shape. OEM Kawasaki P/N: 14026-039-80 Comes with P/N: 14026-012 Chain oiler cover, as shown. Applications:- 77-78 KZ1000A
- 78 Z1R
- 77-78 KZ1000B (LTD)
