• This manual is designed primarily for use by motorcycle mechanics in a properly equipped shop, although it contains enough detail and basic information to make it useful to the motorcycle user who desires to carry out his own basic maintenance and repairs. MANUAL P/N:  61GC402 CONDITION: USED. SEE PICTURES All pages nice, clear, and legible; edges show some wear/dirt from use/handling/storage.  Cover/binding in place showing some wear/dirt from use/handling/storage. Pages: 141 Print Date: 1984 CHAPTERS:
    1. General Information
    2. Lubrication
    3. Maintenance
    4. Fuel System
    5. Engine Removal/Installation
    6. Cylinder Head/Cylinder/Piston
    7. ATAC
    8. Clutch/Kickstart/Shift Linkage
    9. Crankcase/Transmission/Crankshaft
    10. Cooling System
    11. Front Wheel/Brake/Suspension/Steering
    12. Rear Wheel/Brake/Suspension
    13. Subframe/Expansion Chamber
    14. Ignition System
    15. Troubleshooting
    Models Covered:
    • 1985    CR80R
  • 1997 Honda Goldwing GL1500. 21,712 Miles. VIN #___________ Bike was donated by the original owner to the Salvation Army. We picked it up, serviced it, oil change, etc, and are liquidating it for the Salvation Army. These touring bikes have a lot of extras. This one in particular comes with both a lower windshield (installed,) and the original tall windshield. Bike runs really nice. Many accessories. Includes original owners manual with maintenance records, complete tool kit. Has AM/FM cassette, CB and intercom system. Front and rear mic hookups. Radio sounds good. Power windshield for raising and lowering on the fly, as well as adjustable headlamp. A really nice feature is a reverse gear to get out of tight parking spots. Lots of storage compartments for both rider and passenger. Everything works. One key lock unlocks the trunk and both saddlebags. 3 Hondaline bag liners are included. There is a hidden zippered compartment in the lower passenger backrest that stores a smaller rain cover for the seat to use during rainy rest stops. Full bike cover is included. Possible low-cost shipping between Ohio and CT over the holidays!
  • This manual is designed primarily for use by motorcycle mechanics in a properly equipped shop, although it contains enough detail and basic information to make it useful to the motorcycle user who desires to carry out his own basic maintenance and repairs. MANUAL P/N: 61GC402 CONDITION: USED SEE PICTURES All pages nice, clear, and legible; edges show some wear/dirt from use/handling/storage. Cover/binding in place showing some wear/dirt from use/handling/storage. Pages: 141 Print Date: 1984 CHAPTERS:
    • General Information
    • Lubrication
    • Maintenance
    • Fuel System
    • Engine Removal/Installation
    • Cylinder Head/Cylinder/Piston
    • ATAC
    • Clutch/Kickstart/Shift Linkage
    • Crankcase/Transmission/Crankshaft
    • Cooling System
    • Front Wheel/Brake/Suspension/Steering
    • Rear Wheel/Brake/Suspension
    • Subframe/Expansion Chamber
    • Ignition System
    • Troubleshooting
    Models Covered:
    • 1985 CR80R
  • This rim lock is compatible for a 2.50-3.oo" rim size. Uses...cafe racer, vintage drag race, vintage road race. Kawasaki P/N: 41025-053 Applications:
    • F81M
    • F9
    • many others
  • This is a quality Japanese Battery Equivalent to Yuasa P/N: YB3L-A Enerjet P/N: FB3L-A Does not come with acid. 90 day warranty in lower 48 states. L: 98mm W: 56mm H: 110mm Applications:
    • 1982 Honda XL500S
84
    • 85 Honda XL350R
    Local pickup encouraged!
  • A nice addition for a garage, shop or den. For the manual of your favorite motorcycle. These are used and 25-35 years old. Sold as shown
  • Condition: Used Pages are clear and legible, some dirt/fingerprints but they do not interfere with the information. Cover is showing dirt from use. Last couple pages and back cover showing some liquid stain but the pages are not stuck together. Binding is intact. Cover in place, back cover has some issues as shown. Pages: 119 Print Date: October 1984 Models Covered:
    • 1985 XR80R/100R
     
  • Honda P/N: 61GC404 Condition: Used Pages clean/clear with slight discoloration due to age and shelf life. Cover shows some wrinkles/dirt due to due to shelf life. Binding is intact and cover is attached. Pages: 240 Print Date: September 1986 Models Covered:
    • 1985-1987 CR80R
       
  • Honda P/N: 61G405 Condition: Used All pages clear/legible with some fingerprints and smudges but they do not interfere with the information. Pages and cover have some discoloration due to age and storage. Binding in place and the cover is attached. Pages: 228 Print Date: September 1987 Models Covered:
    • 1985-1988 CR80R
  • Honda P/N: 31GEL630 Condition: Used Pages are bright, crisp, and clear. Nice shape! Contains important operating information about your 2002 XR50R! Pages: 165 Models Covered:
    • 2003 XR50R
  • Honda P/N's: 31HN6610 and G0047 Condition: Very gently used. Pages are bright, crisp, and clear. Nice shape! Contains important operating information about your 2002 TRX250EX! Pages: 146 (owner manual) 64 (tips guide) Models Covered:
    • 2002 TRX250EX
  • Honda P/N: 31GS7730 Condition: Used Pages are bright, crisp, and clear. Nice shape! Contains important operating information about your 2001 SA50P! The cover is slightly faded from age.  Pages: 188 Models Covered:
    • 2001 SA50P Elite S
  • Honda P/N: 31GCF660 Condition: Used Pages are bright, crisp, and clear. Nice shape! Contains important operating information about your 2003 XR70R! The cover is slightly faded from age. There is writing in marker on the front cover. Contents page has rip at top, as shown. Pages: 161 Models Covered:
    • 2003 XR70R
  • New, made by Maier U.S.A. P/N: 205800L Applications:
    • 1971-73 CB500 Four
    • 1974-76 CB550K
  • Quality reproduction NOS sprockets, made by Sunstar P/N: 51515 Replaces Honda P/N: 23801-KE7-600 15 Tooth Applications:
    • VF500C MAGNA
    • VF500F INTERCEPTOR
  • New Old Stock Genuine Honda P/N: 30202-122-004 Applications:
    • 78-80 PA50 Mopeds
    Please confirm with dealer or online lookup to verify your application.
  • Quality Japanese made condenser
Made by Koyo (Okamoto Electric Co) Quantity of 2 required per bike. Sold each. Replaces Honda P/N: 30250-333-004 Our P/N: 617-007 Applications:

    • 73-74 CB350F, F1 (4-cylinder)
    • 75-77 CB400F (4-cylinder)
  • 1 set of 2. Vetter Serial # 13-4499 These lowers came with a 1971 CB750. Looks to be original paint. Not 100% sure about the stripes. Local pickup okay. location: farm
  • New Old Stock Genuine Honda P/N: 14500-413-000 Applications:
    • 78-81 CB400
    • 79-81 CM400
  • New Old Stock Genuine Honda P/N: 14510-413-000 Applications:
    • 78-81 CB400
    • 79-81 CM400
    • 82-86 CB450
    • 82-83 CM450
  • Out of stock
    Will replace the following part #s 69-74 CB750:
    • 33400-341-702
    • 33450-341-702
    • 33650-300-000
    • 33610-300-000
    • Will fit others
  • Call with needs! 44,670 Miles on the odometer 10 speed, shaft drive. Many parts are not genuine. We purchased this bike because we needed parts off if it for another project. Motor is stuck. Dual-range transmission. Wheels are okay, tank is fair. Has some decent parts on it. One of the fork tubes has been goofed. Exhaust has been repaired. Carbs are not complete, missing the top. Tank needs attention, could be cleaned. Seat is goofed, as shown. Sitting as is, it needs a lot of work.   THE TANK HAS BEEN SOLD 10/22
  • These rotor covers are in excellent condition, as shown. Very minor nicks at top. Front Right P/N: 44111-MN5-000 Serial # 44111-MAF-000ZB Front Left P/N: 44211-MN5-000 Serial # 44211-MAF-000ZB Applications:
    • 88 GL1500A
    • 88 GL1500 AC
    • May fit 89 GL1500
    location: farm
  • Quality Made in Japan ENERJET P/N: 6N2-2A-1 6 Volt Battery Does not include acid. 60 day warranty in lower 48 states. L: 70mm W: 46mm H: 95mm Application:
    • Honda CA110/S65
    • May fit others
  • This Shop Manual details the proper servicing and repairing procedures for mechanics working on the Honda 500, Model CB500. Carefully reading the complete section before beginning the work and following the steps in order given will result in better maintenance and repair with less trouble and time consumed. Always keep the recommended special tools at the work bench when performing repairs. Use only genuine HONDA replacement parts. Service data for individual parts is consolidated into a single section at the rear of the text, for quick reference. The descriptions and specifications in this manual are those in effect at the time this manual was approved for printing. Shop Manual: A 1000610 Printed in Japan by Honda Motor Co., LTD. Condition: Rough. Back cover is off. Pages are dog-eared and there are some stains in the front of the book. Models Covered

    • 1971 Honda CB500
  • Will work on Honda:
    • XL250R 85-87
    • XR250R 85 95
    • XR250L91-96
    • XL250RF/RG 85-86
    • XR250RF 85
    See back of kit for list of part #s included.
  • Out of stock
    This came to  us with a Kawasaki inventory. Wheel is not bent. Comes with rotors, axle, and speedometer drive. Rotors are in fair condition. Rim is not bent. Rim has some spots, as shown. Application:
    • 77-78 Honda CB750F
    • May work on others.
    Local pick up is encouraged.* *Shipping will be less if rim only is desired. Axle and speedo drive will be removed for shipping. farm
  • Out of stock
    This came to  us with a Kawasaki inventory. Wheel is not bent. Sprocket is in good shape. Rotor is better than fair. Needs a good clean up. Application:
    • 77-78 Honda CB750F
    Local pick up is encouraged.* *Shipping will be less if wheel only is desired. farm
  • This saddlebag was removed from a GL1800 trike conversion. Black. We believe it will fit 1001-2003. May fit others. Lid features hydraulic arm. Right side. Has some scuffs from normal wear, as shown. Honda P/N: 81431-MCA-0000 Local pick up is encouraged. Possible low-cost shipping upon request. Location: FARM J/R   Location: FARM J/R
  • This saddlebag was removed from a GL1800 trike conversion. Black. We believe it will fit 1001-2003. May fit others. Lid features hydraulic arm. Right side. Has some scuffs from normal wear, as shown. Honda P/N: 81231-MCA-0000 Local pick up is encouraged. Possible low-cost shipping upon request. Location: FARM J/R   Location: FARM J/R
  • Quality Made in Japan ENERJET P/N: 6N2-2A-4 6 Volt Battery L: 70mm W: 46mm H: 95mm Does not include acid. 60 day warranty in lower 48 states. Applications: Honda
    • XL100 79
    • XL110 83
    • XL125 79-84
    • XL185 79-83
    • XL250 78-81
    • XL500 79-81
    • May fit others
  • Sold as set of four plugs Honda P/N: 98069-55916
  • Quality Japanese Made Parts Replaces Honda P/N: 30203-300-005 Superseded by P/N: 30203-323-005 Our P/N: 616-009 Applications:
    • 75-77 CB400F
    • 72-73 CB500 K1-K2
    • 76-78 CB550K
    • 76-77 CB550F
    • 76-78 CB750K
    • 76-78 CB750F
    • 76-78 CB750A
  • Service - Repair - Maintenance Clymer Manuals are user-friendly and written in an easy-to-follow format that includes the following features: Two-column layout with large print. Step-by-step instructions. Thumb-tabbed chapters for quick access. Detailed exploded views and photos. Numbered table of contents and extensive index. Bold figure number to quickly match instructions with illustrations and photos. Clymer Manual:  M437 Condition: New, still in wrapper Models Covered

    • 1997-2001  CR250R
  • Hypoid Gear Oil SAE 80W90 For Honda Goldwing and other shaft-driven motorcycles and ATVs. No overseas shipping on lubricants. Shipping to the 48 contiguous states only.
  • We use S100 cleaner for all of our restorations. Safe for all cycle surfaces - paint, chrome, alloy, plastic, rubber, bearings, o-rings, etc. Non-acid, PH controlled and contains corrosion inhibitors. Biodegradable. See link for product demo. No overseas shipping. Shipping to the 48 contiguous states only.
  • We have had this seat in our warehouse for many years. This seat has never been mounted, we were told it fits a Honda 90. Not sure of the application. It could use a good clean up, we just wiped off the dirt.
  • Quality Japanese made condenser Made by Koyo (Okamoto Electric Co) Replaces Honda P/N: 30280-292-670 Superseded by: 30280-292-671, 30280-292-672, 30280-371-000 Our P/N: 617-020 Applications:
    • 68-73 CB350 K1-K4
    • 1973 CB350 G
    • 68-73 CL350 K1-K5
    • 69-73 SL350 K1-K2
    • 69-74 CB450 all
    • 68-74 CL450 K1-K6
    • 75-76 CB500T
    • 75-77 GL1000
  • Frame # SC049CA207534 Sold with title *Call for shipping quote*
  • OEM Style Quality reproduction parts for restoration purposes! Complete with crimping tool, as well as terminal kit. Suitable for most vintage and current Japanese motorcycles with the exception of early Honda. This is THE correct kit for restoring your wiring harness properly. The crimping tool has the ability to cut small screws, such as 2.6, 3, 3.5, 4, and 5m. The wire stripper will accommodate 0.75, 1.0, 1.5, 2.5, 4.0, and 6.0 gauge wire. Crimps 1.5, 2.5, and 6 gauge wire.
  • Custom chrome pike nut. 6mm thread Part Number: 7510-1 Application:
    • Honda CB750
    • Honda CB550
    *Will work on most Hondas with rear mechanical brakes *Will work on others if brake arm is slightly modified
  • We purchased an older distributor's inventory, and these came with it. They appear to be very high quality locks. This rim lock is compatible for a 3.25-3.50 rim size. Uses...cafe racer, vintage drag race, vintage road race. Will be a great part for vintage motorcross front wheels. Reference Kawasaki P/N / Our P/N: 41025-053 Applications:
    Honda Kawasaki Yamaha
    CRF70 KX60 YZ250
    XR70 F7
    XR80 A1
    Scrambler A7
    Elsinore KX250
    ...and many others
  • Quality Made in Japan ENERJET P/N: 6N2-2A-1 6 Volt Battery L: 70mm W: 46mm H: 95mm Does not include acid. 60 day warranty in lower 48 states. Application:
    • Honda CA110/S65
    • May fit others
Go to Top