- 72-76 Sportster
-
NEW Quality part Made in the USA by V-Twin. V-Twin P/N: 12-1410 Replaces Harley-Davidson P/N: 26214-72 Applications: -
This manual is designed primarily for use by motorcycle mechanics in a properly equipped shop, although it contains enough detail and basic information to make it useful to the motorcycle user who desires to carry out his own basic maintenance and repairs. Condition: New, still in wrapper. Pages: 105 Print Date: 1984 Chapters:- Engine, clutch and gearbox
- Fuel system and lubrication
- Ignition system
- Frame and forks
- Wheels, brakes and tires
- Electrical system
- Wiring Diagram
- AE50 49cc 1981, 83-84
- AE80 78cc 1981, 83-84
- AR80 78cc 1981, 83-84
-
Condition: Used This manual is in good condition. All of the pages are clear and legible. Cover and pages are showing signs of age and storage. Binding is intact and cover is attached. Pages: 131 Print Date: 1975 Models Covered:- 1969 and up 741cc Triumph Trident 3-cylinder Model T150 & T160
- 1969-1972 741cc Rocket 3-cylinder Model A75
-
Honda P/N: 61GC404 Condition: Used Pages clean/clear with slight discoloration due to age and shelf life. Cover shows some wrinkles/dirt due to due to shelf life. Binding is intact and cover is attached. Pages: 240 Print Date: September 1986 Models Covered:- 1985-1987 CR80R
-
Honda P/N: 61G405 Condition: Used All pages clear/legible with some fingerprints and smudges but they do not interfere with the information. Pages and cover have some discoloration due to age and storage. Binding in place and the cover is attached. Pages: 228 Print Date: September 1987 Models Covered:- 1985-1988 CR80R
-
Out of stock
This came to us with a Kawasaki inventory. Wheel is not bent. Comes with rotors, axle, and speedometer drive. Rotors are in fair condition. Rim is not bent. Rim has some spots, as shown. Application:- 77-78 Honda CB750F
- May work on others.
-
Out of stock
This came to us with a Kawasaki inventory. Wheel is not bent. Sprocket is in good shape. Rotor is better than fair. Needs a good clean up. Application:- 77-78 Honda CB750F
-
Call with needs! 44,670 Miles on the odometer 10 speed, shaft drive. Many parts are not genuine. We purchased this bike because we needed parts off if it for another project. Motor is stuck. Dual-range transmission. Wheels are okay, tank is fair. Has some decent parts on it. One of the fork tubes has been goofed. Exhaust has been repaired. Carbs are not complete, missing the top. Tank needs attention, could be cleaned. Seat is goofed, as shown. Sitting as is, it needs a lot of work. THE TANK HAS BEEN SOLD 10/22 -
Will work on Honda:- XL250R 85-87
- XR250R 85 95
- XR250L91-96
- XL250RF/RG 85-86
- XR250RF 85
-
Condition: Used Pages are clear and legible, some dirt/fingerprints but they do not interfere with the information. Cover is showing dirt from use. Last couple pages and back cover showing some liquid stain but the pages are not stuck together. Binding is intact. Cover in place, back cover has some issues as shown. Pages: 119 Print Date: October 1984 Models Covered:- 1985 XR80R/100R
-
IRC 2.75/3.00-17 Inner Tube Quality tube, made in Japan. We recently bought out a warehouse of tires and tubes. Keep checking back for more! -
IRC 2.75/3.00-17 Inner Tube Quality tube, made in Japan. We recently bought out a warehouse of tires and tubes. Keep checking back for more!
-
1 1/2 Inch Cam Buckle Straps with Soft Loop Our dye sublimated 1.5 inch cam straps have a 6 foot long adjustable end, a 2700 lb break strength and a 900 lb recommended working load limit per strap. Polyester prints are water, scratch, and fade resistant. Sold in pairs. -
Out of stock
1 1/2 Inch Ratchet Straps with Soft Loop Our dye sublimated 1.5 inch ratchet straps have a 6 foot long adjustable end, a 2700 lb break strength and a 900 lb recommended working load limit per strap. Polyester prints are water, scratch, and fade resistant. Sold in pairs. -
Our soft hooks are 1 1/2-inches wide x 36-inches long, with a 2-inch usable end loop on each end. Best utilized on handlebars or other areas that you don't want to scratch while securing your motorcycle. Our dye sublimated soft ties have a 2700 lb break strength and a 900 lb recommended working load limit per tie. Polyester prints are water, scratch, and fade resistant. Sold in pairs. -
We've reprinted our Vintage Kawasaki shirts on stain-friendly grey! Johnny's Vintage Kawasaki T-shirt features vintage reproduction Japanese Kawasaki artwork on the front, Johnny's logo on back. MEDIUMS are Grey with BLACK trim. All others are grey with RED trim. • 5.5 oz, 50% cotton / 50% polyester • Classic fit • DryBlend® technology delivers moisture-wicking properties • 3/4" contrast neck and sleeve bands • Taped neck and shoulders • Pad printed neck label and double-satin shoulder label • Double needle bottom hem • Quarter-turned to eliminate center crease -
Comes with instructions, as shown. P/N: K-409 Applications:- OR-6 Sport Carrier
- OR-15 Touring Carrier
- OS-50 Sissy Bar
- OL-60 Leaner
-
P/N: K1015 Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for each application. Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Kit Includes:- 4 Pistons
- 4 Ring sets
- 4 Piston pins
- 8 Circlips
- Base gasket
- Head gasket
- Z1 900
- KZ1000
-
P/N: K1075 Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for each application. Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Kit Includes:- 4 Cylinder sleeves
- 4 Pistons
- 4 Ring sets
- 4 Piston pins
- 8 Circlips
- Base gasket
- Head gasket
- Z1 900
- KZ1000
-
New Old Stock Genuine Kawasaki P/N: K14046-109 Kit contains the following P/N's:- (3) 11004-047 Cylinder Head Gasket
- (3) 11009-027 Cylinder Base Gasket
- (6) 16062-015 Air Inlet Gasket
- (3) 18067-003 Exhaust Pipe Gasket
- (1) 92065-011 Oil Drain Plug Gasket
- (1) 92055-018 18mm ORing
- (1) 92055-035 Output Shaft ORing
- (1) 14045-012 L.H. Engine Cover Gasket
- (1) 14046-019 R.H. Engine Cover Gasket
- (1) 92055-025 Tach Gear ORing Bushing
- (1) 670B2020 20mm ORing
- (1) 14050-005 Point Cap Gasket
- (8) 92022-077 Oil Pump Washer
- (1) 16089-001 Oil Pump Cam Shaft V Ring
- (3) 16090-002 Oil Pump Shaft ORing
- (1) 16088-002 Oil Pump Upper Cap ORing
- (1) 16090-003 Oil Pump Lower Cap ORing
- (1) 16094-002 Oil Pump Gasket
- (3) 92065-023 Check Valve Gasket
- (3) 92065-058 Check Valve Gasket
- S1 and KH250
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: K14046-203 Includes Kawasaki P/N:- 1) 11004-037 Head gasket
- 1) 11009-024 Base gasket
- 1) 18050-004 Exhaust gasket
- 1970 F5 350 Bighorn
- 72-75 F9 350
-
New Old Stock* Genuine Kawasaki P/N: K14046-205 *as we have multiple quantities of this kit, the coloration of the copper gaskets will vary due to age Includes:- 11004-044 Gasket, Cylinder head 1
- 18067-017 Gasket, Exhaust pipe 1
- 11009-026 Gasket, Cylinder base 1
- 1971 F6 125
- 1972 F6 125 A
- 1973 F6 125 B
-
NOS Kawasaki Genuine Part Kawasaki P/N: K14046-228 Kit includes:- 1-11004-015 Cylinder head gasket
- 1-11009-009 Cylinder base gasket
- 1-11009-031 Cylinder base gasket (G3SSD)
- 1-18067-003 Exhaust gasket
- 1969 G3TR Bushmaster 90cc
- 1970 G3TR 90cc
- 1969-70 G3SS 90cc
- 1971 G3SSA 90cc
- 1972 G3SSB 90cc
- 1973 G3SSC 90cc
- 1974 G3SSD 90cc
-
New Kawasaki Genuine Gaskets Kawasaki Kit P/N: K14046-232 Kit includes: 1-11004-075 Cylinder Head Gasket. 1-11009-045 Cylinder Base Gasket. 1-18067-021 Exhaust Gasket. 4-92022-077 Oil Line Gasket Applications:- 77-78 KE250B
-
New Old Stock Genuine Kawasaki P/N: K14046-250 Set contains: 11004-032 Head gasket 11009-014 Base gasket 18067-011 Exhaust pipe holder gasket Applications:- F4
-
Part Number: K46000-241 Will fit Windjammer I-IV. Will fit mostly 70's. Local pick up OK. Set of 2. location: farm -
New Old Stock Genuine Kawasaki P/N: K46001-238 Applications:- KZ900
- KZ1000
-
Genuine Kawasaki Accessory NOS Kawasaki Part ~ New Old Stock Fitted Leather Bike Chaps that mount to engine guards. Helps protect rider in bad weather. Embossed with V-Wing logo. Kawasaki P/N: K53000-153C Application:- 96-04 Vulcan 800 Classic
-
New Old Stock Genuine Kawasaki P/N: K53020-111 Still sealed in original packaging. Applications:- Vulcan VN1500
-
This came from a closed dealership. Unopened package. Not 100% sure of the application. **No returns** -
Out of stock
Kawasaki P/N: K53043-045 NOS Kit, comes with instructions. Not 100% sure of applications. Sold as shown. -
Out of stock
K&N Filter P/N: KA-0800 Replaces Kawasaki PN: 11013-034 New, only removed from box for pictures. Application:- 73-75 Z1 900