-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 13239-1028 Applications:- 80-82 KX250
- 1980 KDX250
-
This part is for the headlight mounting brackets to absorb vibration in order to prevent stress cracking and premature headlight failure. They fit below the brackets, over the fork upper tube. Some of the models listed use 4, some use 2. These are considered must have parts for proper headlight mounting. Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 44045-049 Applications:- 1983 EX305 B1 (GPZ 305)
- 76-79 KE125 A3-A6
- 1974 KS125
- 1975 KS125 A
- 78-79 KZ200 A1-A2, A1A
-
New Old Stock Genuine Kawasaki P/N: 13091-011 Applications:- 73-75 Z1 900 (takes 5)
- 77-78 KZ1000A (takes 5)
- Will fit others
-
New Old Stock Genuine Kawasaki P/N: 12011-002 Sold each. Applications:- 73-75 Z1 900 with stock valves
-
This is a reproduction fender. Slight marks from plastic wrapping in storage can be wiped out. Replaces P/N: 35023-011-10 Application:- MT1
-
Sale!
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 92028-025 Applications:- 70-71 G31M CENTURION
- 70-72 G3SS
- 70-75 G4TR
- 72-75 G5 100
- 76-79 KD100
- 75-83 KD80
- 76-01 KE100
- 76-77 KH100
- 76-81 KM100
- 74-75 MC1
-
New Old Stock Genuine Kawasaki P/N: 56018-130 Applications:- 1973 F7 175 B
- 1974 F7 175 C
-
New Old Stock Genuine Kawasaki P/N: 56018-129 Applications:- 1973 F6 125
-
Very nice used right side handlebar mount. OEM Kawasaki P/N: 46012-1038 Applications:- 83 ZX1100-A1 (GPZ 1100)
-
New Old Stock Genuine Kawasaki P/N: 46012-009 Applications:- 71-75 MT1 75cc
- 76-80 KV75
-
New Old Stock Genuine Kawasaki P/N: 35016-006 Applications:- 73-75 F9 350
-
New Old Stock Genuine Kawasaki P/N: 46024-002 Applications:- W1 650
- W2 650
- A1 250
- A1SS 250
- A7 350
- A7SS 350
- Many others
-
This is a very nice set of used rods. These appear to be out of an almost-new engine. They were included in an inventory we purchased. Extremely clean, the small ends show zero wear. Genuine Kawasaki OEM P/N: 13251-1003-JJ Superseded P/N: 13251-1003-II Sold as set of 4. Applications:- 77-79 KZ650B, KZ650C
- 78-79 KZ650D (SR)
- 80 KZ650E LTD
- 80 KZ650F
- 81-82 KZ650H (CSR)
- May fit others
-
New Old Stock Wrist Pin Bearing Genuine Kawasaki P/N: 13033-034 Superseded P/N: 13033-024 Applications:- 71-75 F7 175
- 76-79 KD175
- 76-78 KE175
-
This cover does not have a shift pattern. Has very minor marks as shown from storage. New Old Stock. Genuine Kawasaki P/N: 14026-005 Superseded P/N: 14026-005-E8 Applications:- F8 250
- F81M 250
- F5 350 Bighorn
-
New Old Stock Genuine Kawasaki P/N: 13089-003 Applications:- 73-75 S1 250 (takes 5)
- 76 KH250 (takes 5)
- 72-73 S2 350 (takes 5)
- 74-75 S3 400 (takes 6)
- KH400 (takes 6)
- KX125 (early)
- Will fit others
-
Quality reproduction part, made in Japan. Replaces OEM Kawasaki P/N: 16115-013 Includes 92055-049 O-Ring Applications:- 73-75 Z1 900
- 77-78 KZ1000
-
New Old Stock Genuine Kawasaki P/N: 46012-004 Applications:- 69 H1 500
- Will fit others
-
New Old Stock Genuine Kawasaki P/N: 44009-007 Superseded P/N: F21420-3425 Applications:- Early H1 500
- W1
- Others
-
Quality set of 8 Clutch Plates Made in Japan Vesrah P/N: VC-162 Replaces OEM P/N: 13088-030 Applications:- 73-75 Z1
- 76-77 KZ900
- 80 KZ1000G
- 78 & 80 Z1R
- 77-80 KZ1000
- KZ650
- Will work on others
-
Quality reproduction BL 305, made in Japan. Replaces OEM Kawasaki P/N: 92045-021 Applications:- 73-75 Z1 900
- 77-78 KZ1000A
- Will fit others
-
New Old Stock Genuine Kawasaki P/N: 12049-1005 Applications:- 79-80 KZ650
- 79-81 KZ1000C Police
- 79-80 KZ1000A, KZ1000B LTD
- 80 KZ1000D Z1R
- 79-80 KZ1000E
- 80 KZ1000G Z1 Classic
-
Quality Reproduction Part. Replaces OEM Kawasaki P/N: 26001-145 Applications:- 77-78 KZ1000A
-
New Old Stock Genuine Kawasaki P/N: 43001-1115 Applications- 83-86 ZN1300 Voyager
-
New Old Stock Genuine Kawasaki P/N: 16115-3714 Applications:- JF650
- JH750
- JS750
-
New Old Stock Genuine Kawasaki P/N: 18071-006 Applications:- 73 F11M 250
- 74-76 KX250
- 75-76 KX400
-
New Old Stock Genuine Kawasaki P/N: 16115-3704 Applications:- 1987-91 JS650
- May fit others
-
Quality reproduction part. Replaces OEM Kawasaki P/N: 35022-071 Our P/N: 81-1185 Application:- 73-75 Z1 900
-
Nice used part. This early style does not have the stop lamp indicator as used on later models. Some fading on face, as shown. Has been tested and works. Applications:- 1973 H1 500 D
-
New Old Stock Genuine Kawasaki P/N: 34024-035 Applications:- 1970-73 G4TR 100cc Trail Boss
-
Nice used part. OEM Kawasaki P/N: 35022-1020-6Z Applications:- 1979-82 KZ1300A
-
Quality Made in Japan ENERJET P/N: 12N5.5-3B L: 135mm W: 60mm H: 130mm Acid not included. Will fit Yamaha:- 76-79 RD400
- 84-85 RZ350
- YR2
- DS7 250
- ASC2
- HSI 90
- Will fit others*
-
We restored this bike for the customer about 15 years ago from the ground up. He never rode it and we subsequently purchased it from him. This bike was done back when NOS parts were readily available. Front wheel is NOS. Front fender has some slight damage as shown. We installed an extra fuel valve. Transmission has high / low gearing feature. Runs very nice. Everything works. 3412 miles, comes with clean title. Great bike for display. Great to bring along camping, not too loud. Please call if interested. -
This used tachometer has been tested and works. There is a small dent in the bezel, as shown, which is concealed under the rubber cover. Applications:- 1974-75 H1 500
- 76 KH500
-
New Old Stock Genuine Kawasaki P/N: 12046-010 Superseded P/N: 12046-1007 Applications:- 1978-79 KZ200
- 78-81 KL250
- May fit others
-
This is a nice reproduction part. Replaces OEM Harley P/N: 41737-63 Applications:- 1958-early 79 FL, FLH, Panhead, Shovelhead
-
New Old Stock Genuine Kawasaki P/N: 92027-160 31mm Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 78-80 Z1R
- 77-80 KZ1000A
- Will fit others
-
Quality reproduction part, made in Japan. Replaces OEM P/N: 92075-157 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- May fit others
-
Out of stock
KZT00AE 007422 Plug-in motor. Came out of a bike with 15,000 miles on it, which had been sitting a while. No broken fins. Vapor blast, polished aluminum covers, cam chain, clutch bearing, valve set, valve seals, piston ring, cam chain guide, case O-ring, front sprocket lock tab, alternator grommet, stator repair kit, oil level window, cam chain roller rubber, top roller rubber and pin, tachometer gear seal and O-ring, head cover bolt, exchange bolt and screw, cam cover plug, gasket set, Shim exchange and spark plugs. Will fit in Z1 900, 77-78 KZ1000. Very nice motor. Please contact us for details or for a shipping quote: 330-335-7365 -
.010 Made in USA by Cometic. Cometic P/N: W5025 Replaces P/N: C8095 Applications:- KZ900
- KZ1000
-
.005 Made in USA by Cometic. Replaces P/N: C8098 Applications:- KZ900
- KZ1000
-
Made in USA by Cometic. This copper head gasket came to is in a vintage drag race inventory. It was marked 740cc. It does match up to an OEM #11004-1037 head gasket. Applications:- KZ650
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 12046-1053 Applications:- 1984-86 KL600,
- 87-96 KL650
- KLR650,
- KLR600
-
New Old Stock Genuine Kawasaki P/N: 56019-008 Measures 50 mm from cap to low level groove. Applications:- 66-70 W1, W1SS, W2SS, W2TT 650cc
-
New Old Stock Genuine Kawasaki P/N: 12052-005 Superseded P/N: 12052-002 Applications:- 73-75 Z1 900
- 76 KZ900B LTD
- 76-77 KZ900A
- 77-80 KZ1000
- Will fit others
-
New Old Stock Genuine Kawasaki P/N: 92024-058 Applications:- 72-75 H2 750
- 69-72 H1 500
- 73-75 H1 500
- 76 KH500
- Will fit others
-
Brand new reproduction clutch lever Replaces Kawasaki P/N: 46092-022 Applications:- 76-77 KZ900A
- 76 KH500
- 77-78 KZ1000A
- Will fit others
-
New Old Stock Genuine Kawasaki P/N: 16046-012 Applications:- 77-78 KZ1000A
- May fit others
